Copper 3D PLActive is an innovative Nanocomposite 3D printer filament developed with a high-quality PLA compound and a patented, scientifically validated and highly effective Nano-Copper additive. PLActive filament is FDA registered and eliminates more than 99.99% of fungi, viruses, bacteria and a wide range of microorganisms.

Key features

  • FDA registered filament
  • Compliant to European Union norms: No. 1935/2004 and No. 2023/2006
  • Antibacterial action has been scientifically validated eliminating more than 99.99% of fungi, viruses, bacteria and a wide range of microorganisms
  • Scientifically proven effective against SARS-CoV-2 / Covid-19 with a high antiviral efficacy from 30 seconds and a viral burden reduction higher than 99% in one hour
  • Clinically tested in prosthesis for amputees with excellent results
  • Ideal for the manufacture of other medical applications where it’s dangerous to have bacterial contamination, such as postoperative prostheses, wound dressing and surgical equipment
  • ISO 10993 certified for skin contact
  • Antibacterial properties confirmed by two microbiology laboratories in Chile and USA
  • Manufactured in the Netherlands according to ISO 9001/2015 certified manufacturing standards
  • PLActive has thermoforming characteristics that facilitate post-processing and final adjustments of the 3D printed application
  • Compatible with AquaSolve for complex multi-extrusion 3D printing
  • It can be “hospital sterilized” by various methods (UCV, Ozone, EthOx, Bleach), but NOT with Dry or Wet Heat (autoclave) because this will ruin the PLA, not the additive. The additive remains stable until 990ºC
  • Biodegradable

 

Applications

  • Medical applications
  • Food contact and processing applications
  • Orthopedics
  • Surgical guides and equipment
  • Water-filtering applications
  • Postoperative prostheses

 

General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Experience level: Beginner
Print temp: ± 190 – 210° C Fan speed: 50-100%  
Heat bed: ± 0 – 60° C Enclosure needed: No

*Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.

 

Filament length

ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool
Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m
Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m

 

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

 

Compliance *

This filament is compliant with the below-listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Technical Datasheet:

Safety Datasheet:

PLActive

PLActive is a PLA type of 3D printer filament enhanced with a patented nano-copper composite that eliminates more than 99.99% of fungi, viruses, bacteria and microorganisms.

1.75
2.85
Apple Green
Red
Sky Blue
250
750
2300

PLActive

PLActive is a PLA type of 3D printer filament enhanced with a patented nano-copper composite that eliminates more than 99.99% of fungi, viruses, bacteria and microorganisms.

1.75
2.85
Apple Green
Red
Sky Blue
250
750
2300

If a product is out of stock, it is usually replenished within two weeks.

Copper 3D PLActive is an innovative Nanocomposite 3D printer filament developed with a high-quality PLA compound and a patented, scientifically validated and highly effective Nano-Copper additive. PLActive filament is FDA registered and eliminates more than 99.99% of fungi, viruses, bacteria and a wide range of microorganisms.

Key features

  • FDA registered filament
  • Compliant to European Union norms: No. 1935/2004 and No. 2023/2006
  • Antibacterial action has been scientifically validated eliminating more than 99.99% of fungi, viruses, bacteria and a wide range of microorganisms
  • Scientifically proven effective against SARS-CoV-2 / Covid-19 with a high antiviral efficacy from 30 seconds and a viral burden reduction higher than 99% in one hour
  • Clinically tested in prosthesis for amputees with excellent results
  • Ideal for the manufacture of other medical applications where it’s dangerous to have bacterial contamination, such as postoperative prostheses, wound dressing and surgical equipment
  • ISO 10993 certified for skin contact
  • Antibacterial properties confirmed by two microbiology laboratories in Chile and USA
  • Manufactured in the Netherlands according to ISO 9001/2015 certified manufacturing standards
  • PLActive has thermoforming characteristics that facilitate post-processing and final adjustments of the 3D printed application
  • Compatible with AquaSolve for complex multi-extrusion 3D printing
  • It can be “hospital sterilized” by various methods (UCV, Ozone, EthOx, Bleach), but NOT with Dry or Wet Heat (autoclave) because this will ruin the PLA, not the additive. The additive remains stable until 990ºC
  • Biodegradable

 

Applications

  • Medical applications
  • Food contact and processing applications
  • Orthopedics
  • Surgical guides and equipment
  • Water-filtering applications
  • Postoperative prostheses

 

General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Experience level: Beginner
Print temp: ± 190 – 210° C Fan speed: 50-100%  
Heat bed: ± 0 – 60° C Enclosure needed: No

*Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.

 

Filament length

ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool
Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m
Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m

 

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

 

Compliance *

This filament is compliant with the below-listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Technical Datasheet:

Safety Datasheet: