High Speed Compatible 350mm/s

With high speed 3D printing becoming more prominent due to the introduction of high speed 3D printers, FormFutura is excited to introduce a range of new and existing upgraded materials to our assortment. These materials, while still suitable for traditional printers, have also been fully optimized for the new high speed 3D printing technology.

 

ABSpro is an incredibly strong, glossy and impact resistant filament. You can achieve high precision and fine detail with ABSpro. ABSpro is therefore extremely suitable for printing of mechanical parts.

ABSpro is a professional high-strength ABS (Acrylonitrile Butadiene Styrene) based 3D printer filament. It has been reinforced with a mixture of SMA (Styrene Maleic Anhydride)
and PC (PolyCarbonate).
 

Unique features

  • Extremely strong and impact resistant
  • Extremely high printing precision
  • High gloss
  • Good chemical resistance

 

General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106%
Print temp: ± 250 – 275° C * Print speed: Medium Retraction: Yes ± 5mm
Heat bed: ± 100 – 120° C * Fan speed: 0-30% Experience level: Expert

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

* Because of the relative high percentage of added PolyCarbonate, ABSpro has a tendency to warp and therefore it is recommended to use a temperature-controlled build chamber and to prepare your heat bed with DimaFix fixative spray when 3D printing large(r) scaled objects with ABSpro.

*)When using high speed printing, the above displayed settings will likely need to be adjusted accordingly.
 

Filament length

ρ: 1.05 g/cc 50 gr coil 0.5 Kg spool
Ø 1.75mm ± 19.8m ± 198m
Ø 2.85mm ± 7.5m ± 75m

 

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

* This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Technical Datasheet:

Safety Datasheet:

ABSpro

ABSpro is a PC-ABS filament that is perfect for 3D printing mechanical parts. It is durable, strong and impact resistant and 3D prints with a high dimensional accuracy and perfect interlayer adhesion.

1.75
2.85
Black
White
250
500
2300
4500
8000

ABSpro

ABSpro is a PC-ABS filament that is perfect for 3D printing mechanical parts. It is durable, strong and impact resistant and 3D prints with a high dimensional accuracy and perfect interlayer adhesion.

1.75
2.85
Black
White
250
500
2300
4500
8000

If a product is out of stock, it is usually replenished within two weeks.

High Speed Compatible 350mm/s

With high speed 3D printing becoming more prominent due to the introduction of high speed 3D printers, FormFutura is excited to introduce a range of new and existing upgraded materials to our assortment. These materials, while still suitable for traditional printers, have also been fully optimized for the new high speed 3D printing technology.

 

ABSpro is an incredibly strong, glossy and impact resistant filament. You can achieve high precision and fine detail with ABSpro. ABSpro is therefore extremely suitable for printing of mechanical parts.

ABSpro is a professional high-strength ABS (Acrylonitrile Butadiene Styrene) based 3D printer filament. It has been reinforced with a mixture of SMA (Styrene Maleic Anhydride)
and PC (PolyCarbonate).
 

Unique features

  • Extremely strong and impact resistant
  • Extremely high printing precision
  • High gloss
  • Good chemical resistance

 

General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106%
Print temp: ± 250 – 275° C * Print speed: Medium Retraction: Yes ± 5mm
Heat bed: ± 100 – 120° C * Fan speed: 0-30% Experience level: Expert

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

* Because of the relative high percentage of added PolyCarbonate, ABSpro has a tendency to warp and therefore it is recommended to use a temperature-controlled build chamber and to prepare your heat bed with DimaFix fixative spray when 3D printing large(r) scaled objects with ABSpro.

*)When using high speed printing, the above displayed settings will likely need to be adjusted accordingly.
 

Filament length

ρ: 1.05 g/cc 50 gr coil 0.5 Kg spool
Ø 1.75mm ± 19.8m ± 198m
Ø 2.85mm ± 7.5m ± 75m

 

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

* This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Technical Datasheet:

Safety Datasheet: