STYX-12 is an industrial PA12 grade nylon filament which combines excellent mechanical, chemical and hygroscopic properties with printability.
STYX-12 has a very low water absorption compared to other nylons and can be printed at relatively low temperatures. This combination of properties has resulted in high-performance and industrial-grade nylon which can be printed on a wide-range of FFF/FDM 3D printers.

Unique features

  • Superb mechanical properties
  • Strong, flexible, high impact resistance, high crack resistance, high scratch resistance
  • Excellent chemical resistance
  • Excellent weather and UV resistance
  • Outstanding dimensional stability
  • Good first layer adhesion to EasyPad + DimaFix prepared print bed
  • Very clear in its natural form (without added colorants)

 

General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100 – 110%
Print temp: ± 240 – 270° C Print speed: Medium / High Retraction: Yes ± 5mm
Heat bed: ± 80 – 120° C Fan speed: 0-30% Experience level: Intermediate / Expert

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 1.02 g/cc 50 gr coil 0.5 Kg spool
Ø 1.75mm ± 20.4m ± 204m
Ø 2.85mm ± 7.7m ± 77m

 

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

 

Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Technical Datasheet:

Safety Datasheet:

STYX-12

STYX-12 is an industrial PA12 grade nylon 3D printer filament that 3D prints on relatively low temperatures and combines excellent mechanical, chemical and hygroscopic properties with printability.

2.85
Black
White
Clear
250
SKU: STYX-12

STYX-12

STYX-12 is an industrial PA12 grade nylon 3D printer filament that 3D prints on relatively low temperatures and combines excellent mechanical, chemical and hygroscopic properties with printability.

2.85
Black
White
Clear
250

If a product is out of stock, it is usually replenished within two weeks.

SKU: STYX-12

STYX-12 is an industrial PA12 grade nylon filament which combines excellent mechanical, chemical and hygroscopic properties with printability.
STYX-12 has a very low water absorption compared to other nylons and can be printed at relatively low temperatures. This combination of properties has resulted in high-performance and industrial-grade nylon which can be printed on a wide-range of FFF/FDM 3D printers.

Unique features

  • Superb mechanical properties
  • Strong, flexible, high impact resistance, high crack resistance, high scratch resistance
  • Excellent chemical resistance
  • Excellent weather and UV resistance
  • Outstanding dimensional stability
  • Good first layer adhesion to EasyPad + DimaFix prepared print bed
  • Very clear in its natural form (without added colorants)

 

General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100 – 110%
Print temp: ± 240 – 270° C Print speed: Medium / High Retraction: Yes ± 5mm
Heat bed: ± 80 – 120° C Fan speed: 0-30% Experience level: Intermediate / Expert

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 1.02 g/cc 50 gr coil 0.5 Kg spool
Ø 1.75mm ± 20.4m ± 204m
Ø 2.85mm ± 7.7m ± 77m

 

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

 

Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Technical Datasheet:

Safety Datasheet: