AthenaX is our engineering grade PCTG with the same X-factor as ApolloX and TitanX. This means plug and play 3D printing. Athena’s X-factor ensures low shrinkage plus increased bed- and layer adhesion. This PCTG filament 3D prints as easy as PETG. But, with a superior clarity and impact resistance. Its impact resistance is comparable to Tough PLA. AthenaX enables you to 3D print parts with high dimensional accuracy. Precise parts that are durable, tough, and have a good resistance to chemicals. AthenaX is a water-resistant polymer, which makes it a very versatile material. It is suitable for (food) packaging, electronic housings and even biomedical applications.

 

Important key features

  • High impact strength comparable to Tough PLA.
  • High transparency / clarity.
  • Good chemical resistance.
  • HDT of 76°C / Vicat of 88°C.
  • Water-resistant (hydrophobic) polymer.

 

Suitable applications

  • Packaging and containers.
  • Electronic housings and components.
  • 3D printing end-use parts
  • Small-scale production
  • Making tooling and manufacturing aids.

 

General printing guidelines *

Nozzle size: ≥ 0.4mm Layer height: ≥ 0.1mm Enclosure: Recommended
Print temp: ± 250 – 290°C Heat bed: ± 85 – 100° C Fan speed: 0-100%

Thermal properties

HDT (@0.455MPa) 76°C ISO 75
HDT (@ 1.820 Mpa) 64°C ISO 75
Vicat softening temperature 88°C DSC
 

Pre-drying AthenaX

AthenaX is a PCTG based filament. PCTG is moderately hygroscopic and therefore it is recommended to predry the filament at 75°C for approximately 24 hours before usage for optimal results. You will get the most out of the material properties with pre-dried filaments. For optimal print results we recommend to print AthenaX filament from a drying box to avoid that the material can accumulate humidity from the environment.

 

Storage and handling

Filament should be stored at room temperature in a dry and dark place with humidity below 15%.
Recommended storage temperature is ca. 18-25°C (64.4 -77.0°F). Keep out of moisture, sunlight and direct
heat. When stored properly, product has a shelf life of 24 months. To obtain the best parameters of the
printed object, it is recommended to dry the material prior to usage and to 3D print it directly from a dry box.

 

Product export information

HS Code: 39169090 Description: Monofilament for 3D printing Origin: European Union
Technical Datasheet:

Safety Datasheet:

AthenaX

1.75
Traffic Black
Traffic White
Clear
1000
2300
4500
8000
1000 Refill
2000 Refill
SKU: AthenaX

AthenaX

1.75
Traffic Black
Traffic White
Clear
1000
2300
4500
8000
1000 Refill
2000 Refill

If a product is out of stock, it is usually replenished within two weeks.

SKU: AthenaX

 

AthenaX is our engineering grade PCTG with the same X-factor as ApolloX and TitanX. This means plug and play 3D printing. Athena’s X-factor ensures low shrinkage plus increased bed- and layer adhesion. This PCTG filament 3D prints as easy as PETG. But, with a superior clarity and impact resistance. Its impact resistance is comparable to Tough PLA. AthenaX enables you to 3D print parts with high dimensional accuracy. Precise parts that are durable, tough, and have a good resistance to chemicals. AthenaX is a water-resistant polymer, which makes it a very versatile material. It is suitable for (food) packaging, electronic housings and even biomedical applications.

 

Important key features

  • High impact strength comparable to Tough PLA.
  • High transparency / clarity.
  • Good chemical resistance.
  • HDT of 76°C / Vicat of 88°C.
  • Water-resistant (hydrophobic) polymer.

 

Suitable applications

  • Packaging and containers.
  • Electronic housings and components.
  • 3D printing end-use parts
  • Small-scale production
  • Making tooling and manufacturing aids.

 

General printing guidelines *

Nozzle size: ≥ 0.4mm Layer height: ≥ 0.1mm Enclosure: Recommended
Print temp: ± 250 – 290°C Heat bed: ± 85 – 100° C Fan speed: 0-100%

Thermal properties

HDT (@0.455MPa) 76°C ISO 75
HDT (@ 1.820 Mpa) 64°C ISO 75
Vicat softening temperature 88°C DSC
 

Pre-drying AthenaX

AthenaX is a PCTG based filament. PCTG is moderately hygroscopic and therefore it is recommended to predry the filament at 75°C for approximately 24 hours before usage for optimal results. You will get the most out of the material properties with pre-dried filaments. For optimal print results we recommend to print AthenaX filament from a drying box to avoid that the material can accumulate humidity from the environment.

 

Storage and handling

Filament should be stored at room temperature in a dry and dark place with humidity below 15%.
Recommended storage temperature is ca. 18-25°C (64.4 -77.0°F). Keep out of moisture, sunlight and direct
heat. When stored properly, product has a shelf life of 24 months. To obtain the best parameters of the
printed object, it is recommended to dry the material prior to usage and to 3D print it directly from a dry box.

 

Product export information

HS Code: 39169090 Description: Monofilament for 3D printing Origin: European Union
Technical Datasheet:

Safety Datasheet: