BioFil – PCL is a medical grade PCL filament. It is perfect for orthopedic, orthotic, and biomedical applications. Users can reshape 3D printed parts in warm water at 55°C temperature. This optimizes the fitting process for 3D printed orthoses with a patient’s body. Achieving a perfect fit in minutes.
BioFil – PCL has an excellent adhesion to textiles. This opens new possibilities in orthopedics. Thinks about combining 3D printed orthopedic parts with textiles. Bonding textiles with insoles, midsoles, or other brace or shoe parts. BioFil – PCL is one of the most sustainable filaments on the market. This filament biodegrades completely in soil, water, and via home composting. It doesn’t leave any toxic residue or microplastics.
Important key features
- Reshape printed parts in warm water at 55°C
- Excellent adhesion to textiles
- Good mechanical properties
- Compliant with EN13432 compostability standards
- Biodegradable in soil, marine and water
- Industrial- and home compostable
Suitable Applications
- 3D printing orthotics
- Soft braces
- Corrective braces
- Insoles and midsoles
- Parts for prothesis
General printing guidelines *
Nozzle size: ≥ 0.4mm | Layer height: ≥ 0.10mm | Enclosure needed: No |
Print temp: ± 95 – 130° C | Fan speed: 10 – 50% | Heat bed: ± 40 – 50° C |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Product export information
HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
Safety Datasheet:
BioFil – PCL
Medical grade PCL filament perfect for orthopedic, orthotic, and biomedical applications.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
Featured Products
BioFil – Wood
BioFil – PCL
Medical grade PCL filament perfect for orthopedic, orthotic, and biomedical applications.
If a product is out of stock, it is usually replenished within two weeks.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
BioFil – PCL is a medical grade PCL filament. It is perfect for orthopedic, orthotic, and biomedical applications. Users can reshape 3D printed parts in warm water at 55°C temperature. This optimizes the fitting process for 3D printed orthoses with a patient’s body. Achieving a perfect fit in minutes.
BioFil – PCL has an excellent adhesion to textiles. This opens new possibilities in orthopedics. Thinks about combining 3D printed orthopedic parts with textiles. Bonding textiles with insoles, midsoles, or other brace or shoe parts. BioFil – PCL is one of the most sustainable filaments on the market. This filament biodegrades completely in soil, water, and via home composting. It doesn’t leave any toxic residue or microplastics.
Important key features
- Reshape printed parts in warm water at 55°C
- Excellent adhesion to textiles
- Good mechanical properties
- Compliant with EN13432 compostability standards
- Biodegradable in soil, marine and water
- Industrial- and home compostable
Suitable Applications
- 3D printing orthotics
- Soft braces
- Corrective braces
- Insoles and midsoles
- Parts for prothesis
General printing guidelines *
Nozzle size: ≥ 0.4mm | Layer height: ≥ 0.10mm | Enclosure needed: No |
Print temp: ± 95 – 130° C | Fan speed: 10 – 50% | Heat bed: ± 40 – 50° C |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Product export information
HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
Safety Datasheet:
Related Products
ReForm – Organic rPLA
LUVOCOM 3F PPS CF 9938
BioFil – PCL
Athena GF10
AthenaX CF10
AthenaX
MetalFil – Brass
Kratos PC
Matt PLA (SALE)
EasyWood (SALE)
Customer Service
My account
Services
Company
Legal
Main categories
Contact us
Tarweweg 3
6534 AM Nijmegen
The Netherlands
Phone:
Info: +31 (0)88 743 4000
Sales: +31 (0)88 743 4001
Email:
info@formfutura.com
sales@formfutura.com
support@formfutura.com
marketing@formfutura.com
press@formfutura.com