Shop / Industrial Filaments / Carbon / Performance Carbon / LUVOCOM 3F PP CF 9928
Engineering SLA Series - Tough Resin From   66,11 Excl. VAT
Back to products
Miniature LCD Resin - Model From   30,99 Excl. VAT


LUVOCOM 3F PP CF 9928 BK is a carbon fiber reinforced PP filament for 3D printing strong and stiff parts and is suitable for continuous discharging of statically-generated electricity.


When a product is out of stock, it is usually restocked within two weeks.


FormFutura Luvocom 3F PP CF 9928 BK is a carbon fiber reinforced PP (polypropylene) based 3D printer filament that is extremely stiff and engineered for industrial applications. Luvocom 3F PP CF 9928 BK is a low density 3D printing filament that displays good mechanical properties combined with outstanding chemical resistance and continuous electrostatic discharge (ESD) properties.
Luvocom 3F PP CF 9928 BK features excellent printability with enhanced layer bonding, making it a perfect 3D printing filament for serial production of strong, stiff and ESD-safe end-use parts with an extremely high dimensional accuracy.

Key features

  • Lehvoss Luvocom Luvocom 3F PP CF 9928 BK
  • ESD surface resistance of 107
  • For 3D printing strong, stiff and lightweight parts
  • Good chemical resistance
  • 3D prints with high dimensional accuracy and increased layer adhesion



  • Medical
  • Functional prototypes
  • Drones
  • End-use parts


General printing guidelines *

Nozzle size: ≥ 0.4mm Layer height: ≥ 0.10mm Experience level: Expert
Print temp: ± 220 – 230° C Fan speed: 10 – 50% Drying: 4-6h @80°C (max)
Heat bed: ± 65 – 75° C Enclosure needed: No Adhesion: EasyFix Nr. III

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.


Please be aware that this 3D printing filament contains a relatively high concentration of extremely hard carbon fibers, which have an abrasive nature. In general these carbon fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.

Filament length

ρ: 1.00 g/cc 0.2 Kg spool 0.5 Kg spool
Ø 1.75mm ± 83m ± 208m
Ø 2.85mm ± 31m ± 78m


Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands


Compliance *

This filament is compliant to below-listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Technical Datasheet:

Safety Datasheet: