Luvocom 3F PP CF 9928 BK is engineered for industrial applications. It is an extremely stiff and strong carbon-fiber reinforced PP (polypropylene) filament. It combines low density with outstanding chemical resistance and continuous ESD (electrostatic discharge)  properties. Its excellent printability, enhanced layer bonding and high dimensional accuracy make it the perfect filament for serial production.

Key features

  • Lehvoss Luvocom Luvocom 3F PP CF 9928 BK
  • ESD surface resistance of 107
  • For 3D printing strong, stiff and lightweight parts
  • Good chemical resistance
  • 3D prints with high dimensional accuracy and increased layer adhesion

 

Applications

  • Medical
  • Functional prototypes
  • Drones
  • End-use parts

 

General printing guidelines *

Nozzle size: ≥ 0.4mm Layer height: ≥ 0.10mm Experience level: Expert
Print temp: ± 220 – 230° C Fan speed: 10 – 50% Drying: 4-6h @80°C (max)
Heat bed: ± 65 – 75° C Enclosure needed: No Adhesion: EasyFix Nr. III

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.

Abrasiveness

Please be aware that this 3D printing filament contains a relatively high concentration of extremely hard carbon fibers, which have an abrasive nature. In general these carbon fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.

Filament length

ρ: 1.00 g/cc 0.2 Kg spool 0.5 Kg spool
Ø 1.75mm ± 83m ± 208m
Ø 2.85mm ± 31m ± 78m

 

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

 

Compliance *

This filament is compliant to below-listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Technical Datasheet:

Safety Datasheet:

LUVOCOM 3F PP CF 9928

LUVOCOM 3F PP CF 9928 BK is a carbon fiber reinforced PP filament for 3D printing strong and stiff parts and is suitable for continuous discharging of statically-generated electricity.

1.75
2.85
Black
200
500

LUVOCOM 3F PP CF 9928

LUVOCOM 3F PP CF 9928 BK is a carbon fiber reinforced PP filament for 3D printing strong and stiff parts and is suitable for continuous discharging of statically-generated electricity.

1.75
2.85
Black
200
500

If a product is out of stock, it is usually replenished within two weeks.

Luvocom 3F PP CF 9928 BK is engineered for industrial applications. It is an extremely stiff and strong carbon-fiber reinforced PP (polypropylene) filament. It combines low density with outstanding chemical resistance and continuous ESD (electrostatic discharge)  properties. Its excellent printability, enhanced layer bonding and high dimensional accuracy make it the perfect filament for serial production.

Key features

  • Lehvoss Luvocom Luvocom 3F PP CF 9928 BK
  • ESD surface resistance of 107
  • For 3D printing strong, stiff and lightweight parts
  • Good chemical resistance
  • 3D prints with high dimensional accuracy and increased layer adhesion

 

Applications

  • Medical
  • Functional prototypes
  • Drones
  • End-use parts

 

General printing guidelines *

Nozzle size: ≥ 0.4mm Layer height: ≥ 0.10mm Experience level: Expert
Print temp: ± 220 – 230° C Fan speed: 10 – 50% Drying: 4-6h @80°C (max)
Heat bed: ± 65 – 75° C Enclosure needed: No Adhesion: EasyFix Nr. III

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.

Abrasiveness

Please be aware that this 3D printing filament contains a relatively high concentration of extremely hard carbon fibers, which have an abrasive nature. In general these carbon fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.

Filament length

ρ: 1.00 g/cc 0.2 Kg spool 0.5 Kg spool
Ø 1.75mm ± 83m ± 208m
Ø 2.85mm ± 31m ± 78m

 

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

 

Compliance *

This filament is compliant to below-listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Technical Datasheet:

Safety Datasheet: