STYX-12 - White
This product is no longer available.
STYX-12 has a very low water absorption compared to other nylons and can be printed at relatively low temperatures. This combination of properties has resulted in high-performance and industrial-grade nylon which can be printed on a wide-range of FFF/FDM 3D printers.
Superb mechanical properties
Strong, flexible, high impact resistance, high crack resistance, high scratch resistance
Excellent chemical resistance
Excellent weather and UV resistance
Outstanding dimensional stability
Good first layer adhesion to EasyPad + DimaFix prepared print bed
Very clear in its natural form (without added colorants)
General printing guidelines *
|Nozzle size: ≥ 0.15mm||Layer height: ≥ 0.1mm||Flow rate: ± 100 - 110%|
|Print temp: ± 240 - 270° C||Print speed: Low / Medium||Retraction: Yes ± 5mm|
|Heat bed: ± 80 - 120° C||Fan speed: 0-30%||Experience level: Intermediate / Expert|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 1.02 g/cc||50 gr coil||0.5 Kg spool|
|Ø 1.75mm||± 20.4m||± 204m|
|Ø 2.85mm||± 7.7m||± 77m|
Product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant to below listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Specifications for STYX-12 - White
|Diameter||1.75mm or 2.85mm|
|Weight||500 gram or 50 gram (Sample coil)|