EasyFil PET is as easy to 3D print as regular PLA. It 3D prints with almost no warping. This makes EasyFil PET ideal for 3D printing big objects with fine detail.

EasyFil PET is a pure PET filament. It is an amorphous PET filament that is denser and harder than traditional PETG filaments. Next to this,
EasyFil PET has a higher melting point and lower moisture intake. This unique set of properties translates to a PET filament that enables you to 3D print
accurate parts with improved strength and mechanical properties.

Important key features

  • More dense and rigid than PETG filaments.
  • Stronger and more accurate than traditional PETG.
  • Good UV resistance.
  • Good chemical resistance.
  • High transparency.
  • 3D printing parts for transportation.
  • Manufacturing electronic components.
  • 3D printing manufacturing aids.
  • Household appliances.

 

General printing guidelines

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.05mm Enclosure needed: No
Print temp: ± 230 – 245° C Fan speed: 10-25% Experience level: Beginner
Heat bed: ± 80 – 90° C Adhesive: EasyFil Nr. I

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 1.33 g/cc 0.25 Kg spool 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool
Ø 1.75mm ± 78m ± 233m ± 714m ± 1396m ± 2482m
Ø 2.85mm ± 29m ± 88m ± 269m ± 526m ± 936m

 

Product export information

HS Code: 39169090 Description: Monofilament for 3D Printing Origin: European Union

 

Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available, and applies only for the above described products.

Technical Datasheet:

Safety Datasheet:

EasyFil PET

EasyFil PET is a pure PET filament that is denser, harder and stronger than traditional PETG filaments. It 3D prints with a very high accuracy and almost no warping.

1.75
2.85
Black
White
Clear
Dark Grey
Red
Dark Blue
Dark Green
Light Blue
Light Green
Orange
Silver
Yellow
250
750

EasyFil PET

EasyFil PET is a pure PET filament that is denser, harder and stronger than traditional PETG filaments. It 3D prints with a very high accuracy and almost no warping.

1.75
2.85
Black
White
Clear
Dark Grey
Red
Dark Blue
Dark Green
Light Blue
Light Green
Orange
Silver
Yellow
250
750

If a product is out of stock, it is usually replenished within two weeks.

EasyFil PET is as easy to 3D print as regular PLA. It 3D prints with almost no warping. This makes EasyFil PET ideal for 3D printing big objects with fine detail.

EasyFil PET is a pure PET filament. It is an amorphous PET filament that is denser and harder than traditional PETG filaments. Next to this,
EasyFil PET has a higher melting point and lower moisture intake. This unique set of properties translates to a PET filament that enables you to 3D print
accurate parts with improved strength and mechanical properties.

Important key features

  • More dense and rigid than PETG filaments.
  • Stronger and more accurate than traditional PETG.
  • Good UV resistance.
  • Good chemical resistance.
  • High transparency.
  • 3D printing parts for transportation.
  • Manufacturing electronic components.
  • 3D printing manufacturing aids.
  • Household appliances.

 

General printing guidelines

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.05mm Enclosure needed: No
Print temp: ± 230 – 245° C Fan speed: 10-25% Experience level: Beginner
Heat bed: ± 80 – 90° C Adhesive: EasyFil Nr. I

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 1.33 g/cc 0.25 Kg spool 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool
Ø 1.75mm ± 78m ± 233m ± 714m ± 1396m ± 2482m
Ø 2.85mm ± 29m ± 88m ± 269m ± 526m ± 936m

 

Product export information

HS Code: 39169090 Description: Monofilament for 3D Printing Origin: European Union

 

Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available, and applies only for the above described products.

Technical Datasheet:

Safety Datasheet: