Luvocom 3F PAHT CF 9891 BK is a 15% carbon fiber reinforced PA6 (polyamide) filament. It is extremely stiff and engineered for industrial applications. This 3D printer filament features excellent printability and processing properties. This allows you to 3D print parts with mechanical strength, dimensional accuracy and precision comparable to injection molded parts. It makes this filament a perfect 3D printing material for serial production of strong and stiff end-use parts.
It exhibits a 50% lower water uptake at a four times slower rate compared to standard PA6 nylon filaments. Parts printed with Luvocom 3F PAHT CF 9891 BK are temperature-resistant up to 160 ยฐC.
Key features
- Lehvossย Luvocom 3F PAHT CF 9891 BK inside
- 15% carbon fiber reinforced PA6 filament for improved stiffness
- 50% reduced water uptake at a four times slower rate compared to other PA6 filaments
- Temperature resistant up to 160 ยฐC (200h)
- Tensile strength up to 120 MPa
- 3D prints with high dimensional accuracy and increased layer adhesion
- Good electrical properties
Applications
- Dynamically-stressed parts
- Functional prototypes
- Jigs, tools, and fixtures
- End-use parts
General printing guidelinesย *
Nozzle size:ย โฅ 0.4mm | Layer height:ย โฅ 0.10mm | Experience level:ย Expert |
Print temp:ย ยฑ 260 – 270ยฐ C | Fan speed:ย 0 – 15% | Drying:ย 4h @100ยฐC or 12hย @70ยฐC |
Heat bed:ย ยฑ 70 – 80ยฐ C | Enclosure needed:ย No | Adhesion:ย EasyFix Nr. VI |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Abrasiveness
Please be aware that this 3D printing filament contains a relatively high concentration of extremely hard carbon fibers, which have an abrasive nature. In general these carbon fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.
Filament length
ฯ: 1.24 g/cc | 0.2 Kg spool | 0.5 Kg spool | |||
ร 1.75mm | ยฑ 67m | ยฑ 168m | |||
ร 2.85mm | ยฑ 25m | ยฑ 63m |
Product export information
HS Code:ย 39169090 | Description:ย Monofilament | Country of origin:ย the Netherlands |
Complianceย *
This filament is compliant to below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
Safety Datasheet: