Shop / Filaments / PLA / All round PLA / ReFill PLA
ReFill PETG From   14,04 Excl. VAT
Back to products
FEP Film (100μm) From   8,22 Excl. VAT

ReFill PLA

ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum.

Signal Black
Traffic White
Basalt Grey
Grey Beige
Army Green
Dark Blue
Light Blue
Pastel Blue
Pastel Orange
Salmon Orange
Signal Violet
Traffic Red
Yellow Green
Zinc Yellow

When a product is out of stock, it is usually restocked within two weeks.



FormFutura ReFill PLA is a PLA filament without a spool. ReFill PLA comes on a coil and fits on reusable master spools.
You can download the files to print your very own spool on our downloads page.
This solution is the most sustainable option and reduces packaging waste.
Sustainability doesn’t have to be expensive. ReFill PLA comes at a retail price of €15,- per 750gr coil and is available in 1,75mm diameter.


Important key features

  • Minimal packaging waste (no spool / box).
  • Retail price of €15,- for 0.75kg coils.
  • Food contact approved according to EU directives.
  • Available in a wide range of colors.
  • Available in 0.75kg coils and 2kg coils.
  • Very easy to 3D print.


Suitable applications

  • Functional prototyping.
  • Creating visualization aids.
  • Making detailed concept models.
  • 3D Printing manufacturing aids.


Reduce your carbon footprint with ReFill PLA

FormFutura ReFill PLA isn’t spooled on a disposable spool. It comes on a coil and fits on reusable master spools.
ReFill coils are only packaged in reusable vacuum-sealed zipper bags. These zipper bags can be (re)used for storing your various filaments.



General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100%
Print temp: ± 200 – 230° C Print speed: Medium Retraction: Yes ± 5mm
Heat bed: ± 50 – 60° C Fan speed: 50-100% Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers,
but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers,
hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 1.24 g/cc 0.75 Kg coil 2.3 Kg coil
Ø 1.75mm ± 251m ± 771m
Ø 2.85mm ± 95m ± 291m


Product export information

HS Code: 39169090 Description: Monofilament Origin: European Union


Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge
and may be amended if new cognitions are available and applies only for the above described products.

Technical Datasheet:

Safety Datasheet: