EasyFil ABS is an advanced and relatively easy to process ABS type of 3D printer filament that offers improved mechanical properties compared to regular ABS filaments.
When a product is out of stock, it is usually restocked within two weeks.
EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament.
EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make
EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments.
- Superb process stability and limited warping
- Significant higher impact resistance than average ABS
- Very strong and durable
- Viscat softening temperature of ± 103° C
- Wide variety of vivid opaque colors
General printing guidelines *
|Nozzle size: ≥ 0.15mm||Layer height: ≥ 0.1mm||Flow rate: ± 104%|
|Print temp: ± 245 – 270° C||Print speed: Medium||Retraction: Yes ± 5mm|
|Heat bed: ± 90 – 110° C||Fan speed: 0-30%||Experience level: Intermediate|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 1.03 g/cc||50 gr coil||0.75 Kg spool||2.3 Kg spool|
|Ø 1.75mm||± 20.2m||± 303m||± 928m|
|Ø 2.85mm||± 7.6m||± 114m||± 350m|
Product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant to below listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.