High Speed Compatible 350mm/s
With high speed 3D printing becoming more prominent due to the introduction of high speed 3D printers, FormFutura is excited to introduce a range of new and existing upgraded materials to our assortment. These materials, while still suitable for traditional printers, have also been fully optimized for the new high speed 3D printing technology.
EasyFil PLA is a high-endย impact modified PLA (Poly-Lactic Acid) filament. It is optimized for FFF / FDM 3D printing technology. This has resulted in an easy to use 3D-printer filament. EasyFil PLA is tougher and less rigid than standard PLA. Its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament.
Unique features
- Very easy to print
- Warp-free printing and no deformation after cooling
- Improved flowing behaviour and inter-layer adhesion
- Good first layer adhesion to several (un)heated print surfaces
- Slightly softer than standard PLA resulting in improved strength and impact resistance
- Almost odourless processing/printing
- Biodegradable
- Wide variety of vivid opaque colors
General printing guidelinesย *
| Nozzle size:ย โฅ 0.15mm | Layer height:ย โฅ 0.1mm | Flow rate:ย ยฑ 100% |
| Print temp:ย ยฑ 190 – 230ยฐ C | Print speed:ย Medium | Retraction:ย Yes ยฑ 5mm |
| Heat bed:ย ยฑ 50 – 70ยฐ C | Fan speed:ย 80-100% | Experience level:ย Beginner |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*)When using high speed printing, the above displayed settings will likely need to be adjusted accordingly.
Filament length
| ฯ: 1.24 g/cc | 50 gr coil | 0.75 Kg spool | 2.3 Kg spool | 4.5 Kg spool | 8 Kg spool |
| ร 1.75mm | ยฑ 16.8m | ยฑ 251m | ยฑ 771m | ยฑ 1509m | ยฑ 2682m |
| ร 2.85mm | ยฑ 6.3m | ยฑ 95m | ยฑ 291m | ยฑ 569m | ยฑ 1011m |
Product export information
| HS Code:ย 39169090 | Description:ย Monofilament | Country of origin:ย the Netherlands |
Complianceย *
This filament is compliant to below listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Safety Datasheet:
EasyFil PLA
EasyFil PLA is an easy to print PLA type of 3D printer filament that is available in a wide variety of colors. Its improved flowing behavior make 3D printed layers flow more into each other.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
EasyFil PLA
EasyFil PLA is an easy to print PLA type of 3D printer filament that is available in a wide variety of colors. Its improved flowing behavior make 3D printed layers flow more into each other.
If a product is out of stock, it is usually replenished within two weeks.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
High Speed Compatible 350mm/s
With high speed 3D printing becoming more prominent due to the introduction of high speed 3D printers, FormFutura is excited to introduce a range of new and existing upgraded materials to our assortment. These materials, while still suitable for traditional printers, have also been fully optimized for the new high speed 3D printing technology.
EasyFil PLA is a high-endย impact modified PLA (Poly-Lactic Acid) filament. It is optimized for FFF / FDM 3D printing technology. This has resulted in an easy to use 3D-printer filament. EasyFil PLA is tougher and less rigid than standard PLA. Its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament.
Unique features
- Very easy to print
- Warp-free printing and no deformation after cooling
- Improved flowing behaviour and inter-layer adhesion
- Good first layer adhesion to several (un)heated print surfaces
- Slightly softer than standard PLA resulting in improved strength and impact resistance
- Almost odourless processing/printing
- Biodegradable
- Wide variety of vivid opaque colors
General printing guidelinesย *
| Nozzle size:ย โฅ 0.15mm | Layer height:ย โฅ 0.1mm | Flow rate:ย ยฑ 100% |
| Print temp:ย ยฑ 190 – 230ยฐ C | Print speed:ย Medium | Retraction:ย Yes ยฑ 5mm |
| Heat bed:ย ยฑ 50 – 70ยฐ C | Fan speed:ย 80-100% | Experience level:ย Beginner |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*)When using high speed printing, the above displayed settings will likely need to be adjusted accordingly.
Filament length
| ฯ: 1.24 g/cc | 50 gr coil | 0.75 Kg spool | 2.3 Kg spool | 4.5 Kg spool | 8 Kg spool |
| ร 1.75mm | ยฑ 16.8m | ยฑ 251m | ยฑ 771m | ยฑ 1509m | ยฑ 2682m |
| ร 2.85mm | ยฑ 6.3m | ยฑ 95m | ยฑ 291m | ยฑ 569m | ยฑ 1011m |
Product export information
| HS Code:ย 39169090 | Description:ย Monofilament | Country of origin:ย the Netherlands |
Complianceย *
This filament is compliant to below listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Safety Datasheet:
Customer Service
My account
Services
Company
Legal
Main categories
Contact us
Tarweweg 3
6534 AM Nijmegen
The Netherlands
Phone:
Info: +31 (0)88 743 4000
Sales: +31 (0)88 743 4001
Email:
info@formfutura.com
sales@formfutura.com
support@formfutura.com
marketing@formfutura.com
press@formfutura.com