EasyFil ABS is an easy to use and high-end ABS (Acrylonitrile Butadiene Styrene) 3D printer filament. It is optimized for FFF / FDM 3D printing technology. This has resulted in a filament with a high impact resistance and a high printing stability.
EasyFil ABS prints at slightly higher printing temperatures than regular ABS.
Unique features
- Superb process stability and limited warping
- Significant higher impact resistance than average ABS
- Very strong and durable
- Light-weight
- Viscat softening temperature of ยฑ 103ยฐ C
- Wide variety of vivid opaque colors
General printing guidelinesย *
| Nozzle size:ย โฅ 0.15mm | Layer height:ย โฅ 0.1mm | Flow rate:ย ยฑ 104% |
| Print temp:ย ยฑ 230 – 255ยฐ C | Print speed:ย Medium | Retraction:ย Yes ยฑ 5mm |
| Heat bed:ย ยฑ 100ยฐ C | Fan speed:ย 0-35% | Experience level:ย Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ฯ: 1.03 g/cc | 50 gr coil | 0.75 Kg spool | 2.3 Kg spool | ||
| ร 1.75mm | ยฑ 20.2m | ยฑ 303m | ยฑ 928m | ||
| ร 2.85mm | ยฑ 7.6m | ยฑ 114m | ยฑ 350m |
Product export information
| HS Code:ย 39169090 | Description:ย Monofilament | Country of origin:ย the Netherlands |
Complianceย *
This filament is compliant to below listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Safety Datasheet:
EasyFil ABS
EasyFil ABS is an advanced and relatively easy to process ABS type of 3D printer filament that offers improved mechanical properties compared to regular ABS filaments.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
EasyFil ABS
EasyFil ABS is an advanced and relatively easy to process ABS type of 3D printer filament that offers improved mechanical properties compared to regular ABS filaments.
If a product is out of stock, it is usually replenished within two weeks.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
EasyFil ABS is an easy to use and high-end ABS (Acrylonitrile Butadiene Styrene) 3D printer filament. It is optimized for FFF / FDM 3D printing technology. This has resulted in a filament with a high impact resistance and a high printing stability.
EasyFil ABS prints at slightly higher printing temperatures than regular ABS.
Unique features
- Superb process stability and limited warping
- Significant higher impact resistance than average ABS
- Very strong and durable
- Light-weight
- Viscat softening temperature of ยฑ 103ยฐ C
- Wide variety of vivid opaque colors
General printing guidelinesย *
| Nozzle size:ย โฅ 0.15mm | Layer height:ย โฅ 0.1mm | Flow rate:ย ยฑ 104% |
| Print temp:ย ยฑ 230 – 255ยฐ C | Print speed:ย Medium | Retraction:ย Yes ยฑ 5mm |
| Heat bed:ย ยฑ 100ยฐ C | Fan speed:ย 0-35% | Experience level:ย Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ฯ: 1.03 g/cc | 50 gr coil | 0.75 Kg spool | 2.3 Kg spool | ||
| ร 1.75mm | ยฑ 20.2m | ยฑ 303m | ยฑ 928m | ||
| ร 2.85mm | ยฑ 7.6m | ยฑ 114m | ยฑ 350m |
Product export information
| HS Code:ย 39169090 | Description:ย Monofilament | Country of origin:ย the Netherlands |
Complianceย *
This filament is compliant to below listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Safety Datasheet:
Customer Service
My account
Services
Company
Legal
Main categories
Contact us
Tarweweg 3
6534 AM Nijmegen
The Netherlands
Phone:
Info: +31 (0)88 743 4000
Sales: +31 (0)88 743 4001
Email:
info@formfutura.com
sales@formfutura.com
support@formfutura.com
marketing@formfutura.com
press@formfutura.com