Click to enlarge
PPSU (Polyphenylsulfone) is an amorphous ultra-performance filament based on sulfone polymer from Solvay. PPSU has a glass transition temperature of 220ยฐC. Parts printed with PPSU filament can operate in temperatures up to 180ยฐC. It is resistant against most common automotive fluids. It also is designed to meet the UL 94 V-0 standards with low smoke evolution and low smoke toxicity, making the filament extremely suitable for automotive applications.
The material is qualified for unlimited steam sterilization through EtO gas, radiation, steam autoclaving, plasma, dry heat and cold sterilization. These are ideal characteristics for usage in the medical industry. The material also meets theย  ISO10993 standards for medical applications.
PPSU offers a better impact resistance and chemical resistance compared to regular PEI filaments.

 

Key features

  • Solvay PPSU inside
  • Excellent thermal properties with a glass transition temperature of 220ยฐC.
  • Flame retardant (UL 94 V-0)ย with low smoke evolution and low smoke toxicity
  • Superior hydrolytic resistance
  • Qualified for repeated steam sterilization (>1000 cycles)
  • High Environmental Stress Crack Resistance (ESCR)
  • Very high impact strength and highย stiffness over a wide temperature range
  • Very good resistance against high energy radiation (gamma- and X-rays)
  • Good electrical insulating and dielectric properties

 

Applications

  • Industrial applications
  • Electronics
  • Medical parts
  • Aerospace applications
  • Automotive

 

General printing guidelinesย *

Nozzle size:ย โ‰ฅ 0.4mm Layer height:ย โ‰ฅ 0.10mm Experience level:ย Expert
Print temp:ย ยฑ 360 – 400ยฐ C Fan speed:ย 0 – 25% Drying:ย +4 hours at max.110ยฐC
Heat bed:ย โ‰ฅย 120ยฐ C Enclosure needed:ย 90ยฐC heated chamber
 Adhesion:ย EasyFix Nr. VII

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ฯ: 1.29 g/cc 0.2 Kg spool 0.5 Kg spool
ร˜ 1.75mm ยฑ 64m ยฑ 161m
ร˜ 2.85mm ยฑ 24m ยฑ 61m

 

Product export information

HS Code:ย 39169090 Description:ย Monofilament Country of origin:ย the Netherlands

 

Complianceย *

This filament is compliant to below-listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Technical Datasheet:
View datasheet

Safety Datasheet:

View datasheet

PPSU

PPSU is an ultra-performance 3D printer filament that can be used to 3D print parts for demanding applications that are chemical resistant and can operate in temperatures up to 180ยฐC.

1.75
2.85
Natural
200
500
750
Add to wishlist
SKU: PPSU Tags: , , , , , , ,
  • Ordered before 15h CET? Ships same business day
  • Worldwide shipping with UPS & FedEx
  • One-stop shop for 3D printing materials

Featured Products

LUVOCOM 3F PP CF 9928

From  € 30,99 Excl. VAT
LUVOCOM 3F PP CF 9928 BK is a carbon fiber reinforced PP filament for 3D printing strong and stiff parts and is suitable for continuous discharging of statically-generated electricity.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
-50%

Addigy F3040

From  € 3,10 Excl. VAT
Addigy F3040 is a pure PET type of 3D printer filament by Covestro that combines high heat resistance, dimensional stability and outstanding strength with superb fusion & interlayer strength.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
-50%

Addigy F2060 HT

From  € 3,10 Excl. VAT
Addigy F2060 HT is a flexible TPC filament by Covestro that combines flexibility with chemical resistance against exhaust gas recirculation (EGR) condensate and prolonged high temperature resistance.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
-50%

Addigy F1070

From  € 3,10 Excl. VAT
Addigy F1070 is a pure PA6 (nylon) type of 3D printer filament by Covestro that is heat resistant up to 150ยฐC and highly crystalline making it ideal for 3D printing strong and tough parts with overhangs.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

PEI ULTEM 1010

From  € 59,92 Excl. VAT
PEI ULTEM 1010 combines excellent thermal properties, exceptional dimensional stability, inherent flame retardancy and good chemical resistance into a high performance 3D printing filament.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

LUVOCOM 3F PEKK 50082

From  € 132,23 Excl. VAT
Luvocom 3F PEKK 50082 is a high-performance filament that is easier to 3D print than other PEKK filaments and 3D prints without warping and a perfect interlayer adhesion and dimensional stability.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

LUVOCOM 3F PAHT CF 9891

From  € 30,99 Excl. VAT
LUVOCOM 3F PAHT CF 9891 BK is a 15% carbon fiber reinforced PA6 filament that is engineered for quality controlled 3D printing of end-use parts that require high strength, stiffness and temperature resistance.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

LUVOCOM 3F PAHT 9936

From  € 22,73 Excl. VAT
LUVOCOM 3F PAHT 9936 is a PA6 filament that is engineered for quality controlled 3D printing of end-use parts that require strength and toughness in combination with a high temperature resistance.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

FlexiFil

From  € 17,36 Excl. VAT
FlexiFil is a rubber-like flexible TPC type of 3D printer filament that offer flexibility with a "flexural memory", long term heat resistance, strength and an excellent resistance to UV and chemicals.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

Centaur PP

From  € 15,29 Excl. VAT
Centaur PP is a lightweight and high-performance Polypropylene 3D printer filament. Centaur PP 3D prints with a superb interlayer adhesion and features outstanding mechanical properties.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
    Click to enlarge

    PPSU

    PPSU is an ultra-performance 3D printer filament that can be used to 3D print parts for demanding applications that are chemical resistant and can operate in temperatures up to 180ยฐC.

    1.75
    2.85
    Natural
    200
    500
    750
    Add to wishlist

    If a product is out of stock, it is usually replenished within two weeks.

    SKU: PPSU Tags: , , , , , , ,
    • Ordered before 15h CET? Ships same business day
    • Worldwide shipping with UPS & FedEx
    • One-stop shop for 3D printing materials
    PPSU (Polyphenylsulfone) is an amorphous ultra-performance filament based on sulfone polymer from Solvay. PPSU has a glass transition temperature of 220ยฐC. Parts printed with PPSU filament can operate in temperatures up to 180ยฐC. It is resistant against most common automotive fluids. It also is designed to meet the UL 94 V-0 standards with low smoke evolution and low smoke toxicity, making the filament extremely suitable for automotive applications.
    The material is qualified for unlimited steam sterilization through EtO gas, radiation, steam autoclaving, plasma, dry heat and cold sterilization. These are ideal characteristics for usage in the medical industry. The material also meets theย  ISO10993 standards for medical applications.
    PPSU offers a better impact resistance and chemical resistance compared to regular PEI filaments.

     

    Key features

    • Solvay PPSU inside
    • Excellent thermal properties with a glass transition temperature of 220ยฐC.
    • Flame retardant (UL 94 V-0)ย with low smoke evolution and low smoke toxicity
    • Superior hydrolytic resistance
    • Qualified for repeated steam sterilization (>1000 cycles)
    • High Environmental Stress Crack Resistance (ESCR)
    • Very high impact strength and highย stiffness over a wide temperature range
    • Very good resistance against high energy radiation (gamma- and X-rays)
    • Good electrical insulating and dielectric properties

     

    Applications

    • Industrial applications
    • Electronics
    • Medical parts
    • Aerospace applications
    • Automotive

     

    General printing guidelinesย *

    Nozzle size:ย โ‰ฅ 0.4mm Layer height:ย โ‰ฅ 0.10mm Experience level:ย Expert
    Print temp:ย ยฑ 360 – 400ยฐ C Fan speed:ย 0 – 25% Drying:ย +4 hours at max.110ยฐC
    Heat bed:ย โ‰ฅย 120ยฐ C Enclosure needed:ย 90ยฐC heated chamber
    		 Adhesion:ย EasyFix Nr. VII

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.

    Filament length

    ฯ: 1.29 g/cc 0.2 Kg spool 0.5 Kg spool
    ร˜ 1.75mm ยฑ 64m ยฑ 161m
    ร˜ 2.85mm ยฑ 24m ยฑ 61m

     

    Product export information

    HS Code:ย 39169090 Description:ย Monofilament Country of origin:ย the Netherlands

     

    Complianceย *

    This filament is compliant to below-listed directives and regulations.

    • RoHS directive 2011/65/EC
    • REACH directive 1907/2006/EC

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

    Technical Datasheet:
    View datasheet

    Safety Datasheet:

    View datasheet

    Related Products

    Placeholder

    test product

    testt
    Add to wishlist
    Read more
    Quick view

    LUVOCOM 3F PPS CF 9938

    From  € 82,60 Excl. VAT
      Luvocom 3F PPS CF 9938 BK Filament is a PPS with 15% added carbon fibers. This filament exhibits exceptional
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view

    BioFil – PCL

    From  € 57,81 Excl. VAT
      BioFil โ€“ PCL is a medical grade PCL filament. It is perfect for orthopedic, orthotic, and biomedical applications. Users
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view

    AthenaX CF10

    From  € 35,95 Excl. VAT
      AthenaX CF10 combines all benefits of our AthenaX filament plus 10% carbon fibers. This carbon fiber reinforcement offers significant
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view

    AthenaX

    From  € 27,69 Excl. VAT
      AthenaX is our engineering grade PCTG with the same X-factor as ApolloX and TitanX. This means plug and play
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view

    Kratos PC

    From  € 33,02 Excl. VAT
      Kratos PC is the next generation in PC filament. It uses the same low warp technology as our TitanX
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view
    -50%

    Matt PLA (SALE)

    From  € 11,16 Excl. VAT
    Matt PLA is an aesthetical PLA type of 3D printer filament that 3D prints parts with fine detail and a rough and matt surface finish.
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view
    -50%

    EasyWood (SALE)

    From  € 14,46 Excl. VAT
    EasyWood is a PLA-based 3D printer filament that is filled with 40% wood particles. EasyWood filament is perfect for 3D printing objects with real wood-like aesthetics, smell and touch.
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view
    -50%

    ApolloX (SALE)

    From  € 14,46 Excl. VAT
    ApolloX is a modified ASA based 3D printer filament with improved mechanical properties and is suitable for 3D printing mechanical parts and outdoor applications with high precision and low warping.
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view

    Premium PLA CF03

    From  € 20,62 Excl. VAT
    Premium PLA CF03 is PLA with circa 3% added carbon fibers. It combines PLA properties with the aesthetics of carbon. This results in 3D prints with a magnificent carbon finish and no visible layers.
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view