Our Castable Wax Resin is a highly accurate blue wax-based casting resin. It is designed to be used for direct investment casting parts for dental, jewellery and industrial applications. The wax component in this 3D printing resin offers a clean ash-free burnout. Furthermore it has an extremely low expansion factor. This ensures the wax filler to melt and shrink away from the mould without expanding, and by that protecting fragile investment moulds.

This wax-based castable 3D printing resin has an exceptionally low shrinkage factor. You’re also able to print parts with smooth surfaces and incredibly fine detail. The Castable LCD Resin – Castable Wax has been tested extensively and validated by both dental technicians and jewellers.

Key Features:

  • Ash-free burnout
  • Low expansion factor
  • High dimensional accuracy with low shrinkage factor
  • Smooth services with incredibly fine detail
  • Almost odorless processing
  • Compatible with all open-source SLA, DLP, and LCD 3D printers in the range of 385 – 405nm

 

Applications:

  • Dental molds
  • Jewelry molds
  • Industrial molds

Preparation(s) before starting to print

  • Make sure that the resin is at room temperature (22ยฐCย +/- 1ยฐC) before use
  • The wax component in the resin makes the resin more viscous at lower temperatures.
  • Below 16ยฐC the resin solidifies too much and gets too viscous for good 3D printing results
  • Shake the bottle for at least 2 minutes before each use.
  • After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
  • The resin can be poured back from the vat into the bottle once your print is finished
  • Always use protective measurements like safety glasses and nitrile gloves when handling resins.

    Print Settings:

    Anycubic Photon

    25ยตm

    First / Burn-in Layers: 6x 80 to 85 Seconds
    Normal Layers: 10 to 11 Seconds
    Lifting Distance: 10mm
    Lifting Speed: 45 mm/s
    Light-off Delay: 3
    Bottom Light-off Delay: 3

    Anycubic Photon Mono X

    50ยตm

    First / Burn-in Layers: 4x 55 to 60 Seconds
    Normal Layers: 3.0 to 3.5 Seconds
    First Layer Lifting Distance: 6mm
    Lifting Distance: 6mm
    Lifting Speed: 90 mm/m
    Light-off Delay: 3.0s
    Bottom Light-off Delay: 3.0s
    UV Power: 55 – 60 %

    100ยตm

    First / Burn-in Layers: 4x 55 to 60 Seconds
    Normal Layers: 3.0 to 3.5 Seconds
    First Layer Lifting Distance: 6mm
    Lifting Distance: 6mm
    Lifting Speed: 90 mm/m
    Light-off Delay: 3.0s
    Bottom Light-off Delay: 3.0s
    UV Power: 55 – 60 %

    Elegoo Mars 2 Pro

    50ยตm

    First / Burn-in Layers: 4x 120 to 130 Seconds
    Normal Layers: 2 to 3 Seconds
    Lifting Distance: 10mm
    Lifting Speed: 45 mm/s
    Light-off Delay: 5
    Bottom Light-off Delay: 5

    Elegoo Mars 3

    25ยตm

    First / Burn-in / Bottom Layers: 2x to 3x for 33 to 35 Seconds
    Exposure Time Normal Layers: 3.5ย to 3.6 Seconds
    Lifting Distance: 6+2mm
    Bottom Lifting Distance:6+2mm
    Lifting Speed:60mm/min & 60mm/min
    Retraction Speed:240mm/min & 0mm/min
    Rest Time Before Lift: 0.5 Seconds
    Rest Time After Retract: 2.0 Seconds

    50ยตm

    First / Burn-in / Bottom Layers: 2x to 3x for 33 to 35 Seconds
    Exposure Time Normal Layers: 4 to 4.2 Seconds
    Lifting Distance: 6+2mm
    Bottom Lifting Distance:6+2mm
    Lifting Speed:60mm/min & 60mm/min
    Retraction Speed:240mm/min & 0mm/min
    Rest Time Before Lift: 0.5 Seconds
    Rest Time After Retract: 2.0 Seconds

    Elegoo Saturn

    50ยตm

    First / Burn-in / Bottom Layers: 2x to 3x for 25 to 35 Seconds
    Exposure Time Normal Layers: 4.5ย to 5.0 Seconds
    Lifting Distance: 6mm
    Bottom Lifting Distance:6mm
    Lifting Speed:60mm/min & 120mm/min
    Rest Time Before Lift 2.0 Seconds
    Rest Time After Retract: 1.0 Seconds

     

    Post-Processing:

    • We do advise you to post-process your 3D print in order to achieve the material properties
    • Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes
    • An ultrasonic cleaner is preferred/recommended
    • Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing
    • Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes
    • Cure your object in a high power curing chamber for approximately 20-30 minutes at 65ยฐ C
    • The preferred curing wavelength is between 300-410nm

     

    Safety:

    Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.

    • Always wear Respiratory Protection when sanding/cutting the resin object.
    • Always use nitrile gloves when handling resins and uncured resin objects.

     

    Product export information

    HS Code:ย 2916140090 Description:ย Resin for 3D Printing Country of origin:ย the Netherlands
Technical Datasheet:

Safety Datasheet:

Castable LCD Resin – Castable Wax

Castable Wax Resin is a highly accurate wax-based casting resin for 3D printing direct investment casting parts for dental, jewelry and industrial applications.

Blue
500
SKU: Castable LCD Resin - Castable Wax Tags: , , , , ,

Castable LCD Resin – Castable Wax

Castable Wax Resin is a highly accurate wax-based casting resin for 3D printing direct investment casting parts for dental, jewelry and industrial applications.

Blue
500

If a product is out of stock, it is usually replenished within two weeks.

SKU: Castable LCD Resin - Castable Wax Tags: , , , , ,

 

Our Castable Wax Resin is a highly accurate blue wax-based casting resin. It is designed to be used for direct investment casting parts for dental, jewellery and industrial applications. The wax component in this 3D printing resin offers a clean ash-free burnout. Furthermore it has an extremely low expansion factor. This ensures the wax filler to melt and shrink away from the mould without expanding, and by that protecting fragile investment moulds.

This wax-based castable 3D printing resin has an exceptionally low shrinkage factor. You’re also able to print parts with smooth surfaces and incredibly fine detail. The Castable LCD Resin – Castable Wax has been tested extensively and validated by both dental technicians and jewellers.

Key Features:

  • Ash-free burnout
  • Low expansion factor
  • High dimensional accuracy with low shrinkage factor
  • Smooth services with incredibly fine detail
  • Almost odorless processing
  • Compatible with all open-source SLA, DLP, and LCD 3D printers in the range of 385 – 405nm

 

Applications:

  • Dental molds
  • Jewelry molds
  • Industrial molds

Preparation(s) before starting to print

  • Make sure that the resin is at room temperature (22ยฐCย +/- 1ยฐC) before use
  • The wax component in the resin makes the resin more viscous at lower temperatures.
  • Below 16ยฐC the resin solidifies too much and gets too viscous for good 3D printing results
  • Shake the bottle for at least 2 minutes before each use.
  • After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
  • The resin can be poured back from the vat into the bottle once your print is finished
  • Always use protective measurements like safety glasses and nitrile gloves when handling resins.

    Print Settings:

    Anycubic Photon

    25ยตm

    First / Burn-in Layers: 6x 80 to 85 Seconds
    Normal Layers: 10 to 11 Seconds
    Lifting Distance: 10mm
    Lifting Speed: 45 mm/s
    Light-off Delay: 3
    Bottom Light-off Delay: 3

    Anycubic Photon Mono X

    50ยตm

    First / Burn-in Layers: 4x 55 to 60 Seconds
    Normal Layers: 3.0 to 3.5 Seconds
    First Layer Lifting Distance: 6mm
    Lifting Distance: 6mm
    Lifting Speed: 90 mm/m
    Light-off Delay: 3.0s
    Bottom Light-off Delay: 3.0s
    UV Power: 55 – 60 %

    100ยตm

    First / Burn-in Layers: 4x 55 to 60 Seconds
    Normal Layers: 3.0 to 3.5 Seconds
    First Layer Lifting Distance: 6mm
    Lifting Distance: 6mm
    Lifting Speed: 90 mm/m
    Light-off Delay: 3.0s
    Bottom Light-off Delay: 3.0s
    UV Power: 55 – 60 %

    Elegoo Mars 2 Pro

    50ยตm

    First / Burn-in Layers: 4x 120 to 130 Seconds
    Normal Layers: 2 to 3 Seconds
    Lifting Distance: 10mm
    Lifting Speed: 45 mm/s
    Light-off Delay: 5
    Bottom Light-off Delay: 5

    Elegoo Mars 3

    25ยตm

    First / Burn-in / Bottom Layers: 2x to 3x for 33 to 35 Seconds
    Exposure Time Normal Layers: 3.5ย to 3.6 Seconds
    Lifting Distance: 6+2mm
    Bottom Lifting Distance:6+2mm
    Lifting Speed:60mm/min & 60mm/min
    Retraction Speed:240mm/min & 0mm/min
    Rest Time Before Lift: 0.5 Seconds
    Rest Time After Retract: 2.0 Seconds

    50ยตm

    First / Burn-in / Bottom Layers: 2x to 3x for 33 to 35 Seconds
    Exposure Time Normal Layers: 4 to 4.2 Seconds
    Lifting Distance: 6+2mm
    Bottom Lifting Distance:6+2mm
    Lifting Speed:60mm/min & 60mm/min
    Retraction Speed:240mm/min & 0mm/min
    Rest Time Before Lift: 0.5 Seconds
    Rest Time After Retract: 2.0 Seconds

    Elegoo Saturn

    50ยตm

    First / Burn-in / Bottom Layers: 2x to 3x for 25 to 35 Seconds
    Exposure Time Normal Layers: 4.5ย to 5.0 Seconds
    Lifting Distance: 6mm
    Bottom Lifting Distance:6mm
    Lifting Speed:60mm/min & 120mm/min
    Rest Time Before Lift 2.0 Seconds
    Rest Time After Retract: 1.0 Seconds

     

    Post-Processing:

    • We do advise you to post-process your 3D print in order to achieve the material properties
    • Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes
    • An ultrasonic cleaner is preferred/recommended
    • Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing
    • Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes
    • Cure your object in a high power curing chamber for approximately 20-30 minutes at 65ยฐ C
    • The preferred curing wavelength is between 300-410nm

     

    Safety:

    Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.

    • Always wear Respiratory Protection when sanding/cutting the resin object.
    • Always use nitrile gloves when handling resins and uncured resin objects.

     

    Product export information

    HS Code:ย 2916140090 Description:ย Resin for 3D Printing Country of origin:ย the Netherlands
Technical Datasheet:

Safety Datasheet: