-50%
Click to enlarge

STYX-12 is an industrial PA12 grade nylon filament which combines excellent mechanical, chemical and hygroscopic properties with printability.
STYX-12 has a very low water absorption compared to other nylons and can be printed at relatively low temperatures. This combination of properties has resulted in high-performance and industrial-grade nylon which can be printed on a wide-range of FFF/FDM 3D printers.

Unique features

  • Superb mechanical properties
  • Strong, flexible, high impact resistance, high crack resistance, high scratch resistance
  • Excellent chemical resistance
  • Excellent weather and UV resistance
  • Outstanding dimensional stability
  • Good first layer adhesion to EasyPad + DimaFix prepared print bed
  • Very clear in its natural form (without added colorants)

 

General printing guidelinesย *

Nozzle size:ย โ‰ฅ 0.15mm Layer height:ย โ‰ฅ 0.1mm Flow rate:ย ยฑ 100 – 110%
Print temp:ย ยฑ 240 – 270ยฐ C Print speed:ย Mediumย / High Retraction:ย Yes ยฑ 5mm
Heat bed:ย ยฑ 80 – 120ยฐ C Fan speed:ย 0-30% Experience level:ย Intermediate / Expert

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ฯ: 1.02 g/cc 50 gr coil 0.5 Kg spool
ร˜ 1.75mm ยฑ 20.4m ยฑ 204m
ร˜ 2.85mm ยฑ 7.7m ยฑ 77m

 

Product export information

HS Code:ย 39169090 Description:ย Monofilament Country of origin:ย the Netherlands

 

Complianceย *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Technical Datasheet:
View datasheet

Safety Datasheet:

View datasheet

STYX-12

STYX-12 is an industrial PA12 grade nylon 3D printer filament that 3D prints on relatively low temperatures and combines excellent mechanical, chemical and hygroscopic properties with printability.

2.85
Black
White
Clear
250
Add to wishlist
SKU: STYX-12
  • Ordered before 15h CET? Ships same business day
  • Worldwide shipping with UPS & FedEx
  • One-stop shop for 3D printing materials

Featured Products

-50%

EasyWood (SALE)

From  € 14,46 Excl. VAT
EasyWood is a PLA-based 3D printer filament that is filled with 40% wood particles. EasyWood filament is perfect for 3D printing objects with real wood-like aesthetics, smell and touch.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
-50%

EasyCork

From  € 14,46 Excl. VAT
EasyCork is a PLA-based 3D printer filament that is filled with 30% cork particles. EasyCork filament is perfect for 3D printing objects with real cork-like aesthetics, smell and touch.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
-50%

MD FLEX

From  € 19,84 Excl. VAT
MD Flex is a flexible TPU type of 3D printer filament enhanced with a patented nano-copper composite that eliminates more than 99.99% of fungi, viruses, bacteria and microorganisms.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
-50%

Durabio

From  € 2,23 Excl. VAT
DURABIO combines most of the advantageous properties of PC and PMMA. It is a bio-based engineering 3D printer filament with great value.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
-50%

Addigy F2060 HT

From  € 3,10 Excl. VAT
Addigy F2060 HT is a flexible TPC filament by Covestro that combines flexibility with chemical resistance against exhaust gas recirculation (EGR) condensate and prolonged high temperature resistance.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
-50%

Addigy F2045

From  € 3,10 Excl. VAT
Addigy F2045 is a highly flexible TPC filament by Covestro that is made from 50% bio-based feedstock and exhibits excellent processing characterisics, flexibility, strenght and heat resistance.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
-50%

Addigy F1030

From  € 3,10 Excl. VAT
Addigy F1030 is a pure PA6/66 PA (nylon) type of 3D printer filament by Covestro that is heat resistant up 125ยฐ C and 3D prints with an impressive interlayer strength and superb surface quality.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
-50%

EasyFil PET

From  € 4,55 Excl. VAT
EasyFil PET is a pure PET filament that is denser, harder and stronger than traditional PETG filaments. It 3D prints with a very high accuracy and almost no warping.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

Crystal Flex

From  € 15,70 Excl. VAT
Crystal Flex is a SBC type of 3D printer filament that yields formability, toughness, and clarity into is a high-performance semi-flexible 3D printer filament.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
-50%

ClearScent ABS

From  € 5,58 Excl. VAT
ClearScent ABS is a translucent MABS type of 3D printer filament that is easy to 3D print with limited warping and styrene smell. This filament features translucency with good mechanical properties.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
    -50%
    Click to enlarge

    STYX-12

    STYX-12 is an industrial PA12 grade nylon 3D printer filament that 3D prints on relatively low temperatures and combines excellent mechanical, chemical and hygroscopic properties with printability.

    2.85
    Black
    White
    Clear
    250
    Add to wishlist

    If a product is out of stock, it is usually replenished within two weeks.

    SKU: STYX-12
    • Ordered before 15h CET? Ships same business day
    • Worldwide shipping with UPS & FedEx
    • One-stop shop for 3D printing materials

    STYX-12 is an industrial PA12 grade nylon filament which combines excellent mechanical, chemical and hygroscopic properties with printability.
    STYX-12 has a very low water absorption compared to other nylons and can be printed at relatively low temperatures. This combination of properties has resulted in high-performance and industrial-grade nylon which can be printed on a wide-range of FFF/FDM 3D printers.

    Unique features

    • Superb mechanical properties
    • Strong, flexible, high impact resistance, high crack resistance, high scratch resistance
    • Excellent chemical resistance
    • Excellent weather and UV resistance
    • Outstanding dimensional stability
    • Good first layer adhesion to EasyPad + DimaFix prepared print bed
    • Very clear in its natural form (without added colorants)

     

    General printing guidelinesย *

    Nozzle size:ย โ‰ฅ 0.15mm Layer height:ย โ‰ฅ 0.1mm Flow rate:ย ยฑ 100 – 110%
    Print temp:ย ยฑ 240 – 270ยฐ C Print speed:ย Mediumย / High Retraction:ย Yes ยฑ 5mm
    Heat bed:ย ยฑ 80 – 120ยฐ C Fan speed:ย 0-30% Experience level:ย Intermediate / Expert

    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

    Filament length

    ฯ: 1.02 g/cc 50 gr coil 0.5 Kg spool
    ร˜ 1.75mm ยฑ 20.4m ยฑ 204m
    ร˜ 2.85mm ยฑ 7.7m ยฑ 77m

     

    Product export information

    HS Code:ย 39169090 Description:ย Monofilament Country of origin:ย the Netherlands

     

    Complianceย *

    This filament is compliant to below listed directives and regulations.

    • RoHS directive 2011/65/EC
    • REACH directive 1907/2006/EC

    *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

    Technical Datasheet:
    View datasheet

    Safety Datasheet:

    View datasheet

    Related Products

    Placeholder

    test product

    testt
    Add to wishlist
    Read more
    Quick view

    LUVOCOM 3F PPS CF 9938

    From  € 82,60 Excl. VAT
      Luvocom 3F PPS CF 9938 BK Filament is a PPS with 15% added carbon fibers. This filament exhibits exceptional
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view

    BioFil – PCL

    From  € 57,81 Excl. VAT
      BioFil โ€“ PCL is a medical grade PCL filament. It is perfect for orthopedic, orthotic, and biomedical applications. Users
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view

    AthenaX CF10

    From  € 35,95 Excl. VAT
      AthenaX CF10 combines all benefits of our AthenaX filament plus 10% carbon fibers. This carbon fiber reinforcement offers significant
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view

    AthenaX

    From  € 27,69 Excl. VAT
      AthenaX is our engineering grade PCTG with the same X-factor as ApolloX and TitanX. This means plug and play
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view

    Kratos PC

    From  € 33,02 Excl. VAT
      Kratos PC is the next generation in PC filament. It uses the same low warp technology as our TitanX
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view
    -50%

    Matt PLA (SALE)

    From  € 11,16 Excl. VAT
    Matt PLA is an aesthetical PLA type of 3D printer filament that 3D prints parts with fine detail and a rough and matt surface finish.
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view
    -50%

    EasyWood (SALE)

    From  € 14,46 Excl. VAT
    EasyWood is a PLA-based 3D printer filament that is filled with 40% wood particles. EasyWood filament is perfect for 3D printing objects with real wood-like aesthetics, smell and touch.
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view
    -50%

    ApolloX (SALE)

    From  € 14,46 Excl. VAT
    ApolloX is a modified ASA based 3D printer filament with improved mechanical properties and is suitable for 3D printing mechanical parts and outdoor applications with high precision and low warping.
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view

    Premium PLA CF03

    From  € 20,62 Excl. VAT
    Premium PLA CF03 is PLA with circa 3% added carbon fibers. It combines PLA properties with the aesthetics of carbon. This results in 3D prints with a magnificent carbon finish and no visible layers.
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view