It is very easy to 3D print with Premium PLA CF03, it prints with great precision and superb layer adhesion. This filament does require the use of a 0.6 diameter nozzle. While the main focus of this filament is on utilizing the aesthetics of carbon. It still provides above average strength in comparison to regular PLA.
ReFill
ReFill offers a completely new way to experience 3D printing filament. Weโve ditched the wasteful plastic spools altogether. ReFill consists only of the filament coil itself, housed in a reusable, vacuum-sealed bag. This significantly reduces waste compared to traditional spools.
FormFuturaโs ReFill system is designed with the aim of lessening your carbon footprint. It brings an 80% reduction in packaging waste, while potentially decreasing shipping volume by up to 55%.
The user-friendly system is compatible with nearly all FDM printers, including the widely used AMS system.
Recommended product: FormFutura ReFill System
Premium PLA CF03 is our Premium PLA with circa 3% added carbon fibers. This delicate filling with carbon fibers results in superb aesthetics. Easy printing. No visible layers. Amazing carbon surface finish.
Premium PLA CF03 is the filament of choice for prints that need a carbon look and feel. It focuses on the aesthetics of carbon. Not on the mechanical properties of carbon. You can even print Premium PLA CF03 with brass nozzles.
Important key features
- PLA with amazing carbon look and aesthetics
- 3D prints without visible layers
- Compatible with brass nozzles
- High speed printing compatible
- Biodegradability under composting conditions
Suitable applications
- Home decor
- Functional prototyping
- Visualization aids
- End use parts that do not require the full strength of carbon
General printing guidelines *
| Nozzle size: โฅ 0.6mm | Layer height: โฅ 0.2mm | Flow rate: ยฑ 100% |
| Print temp: ยฑ 230 – 280ยฐC | Heat bed: ยฑ 50 – 60ยฐ C | Fan speed: 5-100% |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of
different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Storage and handling
Filament should be stored at room temperature in a dry and dark place with humidity below 15%. Recommended storage temperature is ca. 18-25ยฐC (64.4 -77.0ยฐF). Keep out of moisture, sunlight and direct heat. When stored properly, product has a shelf life of 24 months. To obtain the best parameters of the printed object, it is recommended to dry the material prior to usage and to 3D print it directly from a dry box.
Product export information
| HS Code: 39169090 | Description: Monofilament for 3D printing | Origin: European Union |
Safety Datasheet:
Premium PLA CF03
Premium PLA CF03 is PLA with circa 3% added carbon fibers. It combines PLA properties with the aesthetics of carbon. This results in 3D prints with a magnificent carbon finish and no visible layers.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
Premium PLA CF03
Premium PLA CF03 is PLA with circa 3% added carbon fibers. It combines PLA properties with the aesthetics of carbon. This results in 3D prints with a magnificent carbon finish and no visible layers.
If a product is out of stock, it is usually replenished within two weeks.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
It is very easy to 3D print with Premium PLA CF03, it prints with great precision and superb layer adhesion. This filament does require the use of a 0.6 diameter nozzle. While the main focus of this filament is on utilizing the aesthetics of carbon. It still provides above average strength in comparison to regular PLA.
ReFill
ReFill offers a completely new way to experience 3D printing filament. Weโve ditched the wasteful plastic spools altogether. ReFill consists only of the filament coil itself, housed in a reusable, vacuum-sealed bag. This significantly reduces waste compared to traditional spools.
FormFuturaโs ReFill system is designed with the aim of lessening your carbon footprint. It brings an 80% reduction in packaging waste, while potentially decreasing shipping volume by up to 55%.
The user-friendly system is compatible with nearly all FDM printers, including the widely used AMS system.
Recommended product: FormFutura ReFill System
Premium PLA CF03 is our Premium PLA with circa 3% added carbon fibers. This delicate filling with carbon fibers results in superb aesthetics. Easy printing. No visible layers. Amazing carbon surface finish.
Premium PLA CF03 is the filament of choice for prints that need a carbon look and feel. It focuses on the aesthetics of carbon. Not on the mechanical properties of carbon. You can even print Premium PLA CF03 with brass nozzles.
Important key features
- PLA with amazing carbon look and aesthetics
- 3D prints without visible layers
- Compatible with brass nozzles
- High speed printing compatible
- Biodegradability under composting conditions
Suitable applications
- Home decor
- Functional prototyping
- Visualization aids
- End use parts that do not require the full strength of carbon
General printing guidelines *
| Nozzle size: โฅ 0.6mm | Layer height: โฅ 0.2mm | Flow rate: ยฑ 100% |
| Print temp: ยฑ 230 – 280ยฐC | Heat bed: ยฑ 50 – 60ยฐ C | Fan speed: 5-100% |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of
different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Storage and handling
Filament should be stored at room temperature in a dry and dark place with humidity below 15%. Recommended storage temperature is ca. 18-25ยฐC (64.4 -77.0ยฐF). Keep out of moisture, sunlight and direct heat. When stored properly, product has a shelf life of 24 months. To obtain the best parameters of the printed object, it is recommended to dry the material prior to usage and to 3D print it directly from a dry box.
Product export information
| HS Code: 39169090 | Description: Monofilament for 3D printing | Origin: European Union |
Safety Datasheet:
Customer Service
My account
Services
Company
Legal
Main categories
Contact us
Tarweweg 3
6534 AM Nijmegen
The Netherlands
Phone:
Info: +31 (0)88 743 4000
Sales: +31 (0)88 743 4001
Email:
info@formfutura.com
sales@formfutura.com
support@formfutura.com
marketing@formfutura.com
press@formfutura.com