AthenaX GF10 combines all benefits of our AthenaX filament plus 10% glass fibers. This glass fiber reinforcement has significant advantages. It offers not only great electrical- and thermal insulation properties. Your 3D printed parts will not only be stiff, strong and durable. They will also be resistant to wear and chemicals. In short, AthenaX GF10 is your go-to engineering filament. Even for the most demanding applications.
This engineering filament is very easy to 3D print on open desktop machines. No enclosure, or heated chamber needed. Its low shrinkage factor and perfect layer adhesion make AthenaX GF10 a breeze to print with. Both on desktop and large format 3D printers.
Important key features
- HPCTG + 10% glass fibers.
- HDT of 78°C / VICAT of 77°C.
- Great electrical- and thermal insulation specs.
- Durable and good resistance to corrosion.
- High stiffness and tensile strength.
Suitable applications
- Manufacturing safety devices.
- Housings and covers.
- 3D printing electrical safety components.
- Small-scale production
- Making tooling and manufacturing aids.
General printing guidelines *
| Nozzle size: ≥ 0.4mm | Layer height: ≥ 0.1mm | Enclosure: Recommended |
| Print temp: ± 250 – 290°C | Heat bed: ± 85 – 100° C | Fan speed: 0-100% |
Thermal properties
HDT (@0.455MPa) 78°C ISO 75
HDT (@ 1.820 Mpa) 68°C ISO 75
Vicat softening temperature 77°C DSC
Pre-drying AthenaX GF10
AthenaX is a PCTG based filament. PCTG is moderately hygroscopic and therefore it is recommended to predry the filament at 75°C for approximately 24 hours before usage for optimal results. You will get the most out of the material properties with pre-dried filaments. For optimal print results we recommend to print AthenaX filament from a drying box to avoid that the material can accumulate humidity from the
environment.
Storage and handling
Filament should be stored at room temperature in a dry and dark place with humidity below 15%.
Recommended storage temperature is ca. 18-25°C (64.4 -77.0°F). Keep out of moisture, sunlight and direct
heat. When stored properly, product has a shelf life of 24 months. To obtain the best parameters of the
printed object, it is recommended to dry the material prior to usage and to 3D print it directly from a dry box.
Product export information
| HS Code: 39169090 | Description: Monofilament for 3D printing | Origin: European Union |
Safety Datasheet:
Athena GF10
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
Featured Products
Athena GF10
If a product is out of stock, it is usually replenished within two weeks.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
AthenaX GF10 combines all benefits of our AthenaX filament plus 10% glass fibers. This glass fiber reinforcement has significant advantages. It offers not only great electrical- and thermal insulation properties. Your 3D printed parts will not only be stiff, strong and durable. They will also be resistant to wear and chemicals. In short, AthenaX GF10 is your go-to engineering filament. Even for the most demanding applications.
This engineering filament is very easy to 3D print on open desktop machines. No enclosure, or heated chamber needed. Its low shrinkage factor and perfect layer adhesion make AthenaX GF10 a breeze to print with. Both on desktop and large format 3D printers.
Important key features
- HPCTG + 10% glass fibers.
- HDT of 78°C / VICAT of 77°C.
- Great electrical- and thermal insulation specs.
- Durable and good resistance to corrosion.
- High stiffness and tensile strength.
Suitable applications
- Manufacturing safety devices.
- Housings and covers.
- 3D printing electrical safety components.
- Small-scale production
- Making tooling and manufacturing aids.
General printing guidelines *
| Nozzle size: ≥ 0.4mm | Layer height: ≥ 0.1mm | Enclosure: Recommended |
| Print temp: ± 250 – 290°C | Heat bed: ± 85 – 100° C | Fan speed: 0-100% |
Thermal properties
HDT (@0.455MPa) 78°C ISO 75
HDT (@ 1.820 Mpa) 68°C ISO 75
Vicat softening temperature 77°C DSC
Pre-drying AthenaX GF10
AthenaX is a PCTG based filament. PCTG is moderately hygroscopic and therefore it is recommended to predry the filament at 75°C for approximately 24 hours before usage for optimal results. You will get the most out of the material properties with pre-dried filaments. For optimal print results we recommend to print AthenaX filament from a drying box to avoid that the material can accumulate humidity from the
environment.
Storage and handling
Filament should be stored at room temperature in a dry and dark place with humidity below 15%.
Recommended storage temperature is ca. 18-25°C (64.4 -77.0°F). Keep out of moisture, sunlight and direct
heat. When stored properly, product has a shelf life of 24 months. To obtain the best parameters of the
printed object, it is recommended to dry the material prior to usage and to 3D print it directly from a dry box.
Product export information
| HS Code: 39169090 | Description: Monofilament for 3D printing | Origin: European Union |
Safety Datasheet:
Customer Service
My account
Services
Company
Legal
Main categories
Contact us
Tarweweg 3
6534 AM Nijmegen
The Netherlands
Phone:
Info: +31 (0)88 743 4000
Sales: +31 (0)88 743 4001
Email:
info@formfutura.com
sales@formfutura.com
support@formfutura.com
marketing@formfutura.com
press@formfutura.com