Luvocom 3F PAHT KK 50056 BK FR filament is a PA6 Nylon filament filled with ceramic microspheres. It has the highest flame retardant rating and produces low smoke. By that, this filament complies with the fire behavior norms for the railway industry.
- UL-94 V-0 flame retardant rating
-
EN 45545 (fire behavior of materials in trains)
- ISO 4589-2 OI (oxygen Index) R22 + R23 – HL1, HL2, HL3
- ISO 5659-2 Ds (smoke density) R22 + R23 – HL3
Printed parts are stiff, strong, and temperature resistant up to 160C. Your parts can operate in high temperature conditions and resist high temperature fluctuations. Luvocom 3F PAHT KK 50056 BK FR is an excellent material for electrical insulation.
Key features
- UL-94 V-0 flame retardant rating
- Complies with EN 45545 fire behavior norms for trains
- Heat resistant up to 160 °C
- Electrical insulator.
- Halogen free
Suitable Applications
- High performance end-use parts
- Replacement parts in vehicles
- Applications that require fire resistance
- Printing electrical insulating parts
- Small scale productions
General printing guidelines *
| Nozzle size: ≥ 0.5mm | Layer height: ≥ 0.20mm | Experience level: Expert |
| Print temp: ± 270 – 300°C | Fan speed: 0 – 25% | Drying: 12h @80°C (max) |
| Heat bed: ± 90 – 110° C | Enclosure needed: Required | Adhesion: EasyFix Nr. VI |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
| Material Properties | Typical Value | Test Method |
|---|---|---|
| Specific gravity | 1.49 g/cm³ | ISO 1183-3 |
| Water absorption (23°C / 24h) | <0.3% | ISO 62 |
| Linear mould shrinkage | 0.0-0.1% | DIN 16742 |
| Mechanical Properties (23°C / 50% RH) | Typical Value | Test Method |
|---|---|---|
| Tensile strength (dry, @50 mm/min) | 55 MPa | ISO 527 |
| Elongation at maximum force (dry, @50 mm/min) | 1.2% | ISO 527 |
| Modulus of elasticity (dry, @1 mm/min) | 6 GPa | ISO 527 |
| Thermal Properties (23°C / 50% RH) | Typical Value | Test Method |
|---|---|---|
| HDT A 90°C | 90°C | ISO 75 |
| Continuous service temperature (20,000 h) | 120°C | IEC 60216 |
| Service temperature (during lifetime max. 200h) | 160°C | — |
| Electrical Properties (23°C / 50% RH) | Typical Value | Test Method |
|---|---|---|
| Insulation resistance strip electrode (R25) | >109 Ω | DIN IEC 60167 |
| Surface resistance (ROB) | >109 Ω | DIN IEC 60093 |
Drying recommendations
Luvocom 3F PAHT KK 50056 BK FR is a hygroscopic filament and therefore it is necessary to pre-dry the
filament in a blast drying oven at below settings:
- Temperature: 80°C
- Duration: 12hours
For optimal print results we recommend to print the pre-dried Luvocom 3F PAHT KK 50056 BK FR filament from a drying box to avoid that the material can accumulate humidity from the environment.
Abrasiveness
Please be aware that this 3D printing filament contains a relatively high concentration of extremely hard carbon fibers, which have an abrasive nature. In general these carbon fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.
Storage and handling
Filament should be stored at room temperature in a dry and dark place with humidity below 15%. Recommended storage temperature is ca. 18-25°C (64.4 -77.0°F). Keep out of moisture, sunlight and direct heat. When stored properly, product has a shelf life of 24 months. To obtain the best parameters of the printed object, it is recommended to dry the material prior to usage and to 3D print it directly from a dry box.
Compliance *
This filament is compliant to below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
Product export information
| HS Code: 39169090 | Description: Monofilament for 3D printing | Country of origin: European Union |
Safety Datasheet:
LUVOCOM 3F PAHT KK 50056 FR
Strong PA6 filament filled with ceramic microspheres and offers exceptional high flame retardancy.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
LUVOCOM 3F PAHT KK 50056 FR
Strong PA6 filament filled with ceramic microspheres and offers exceptional high flame retardancy.
If a product is out of stock, it is usually replenished within two weeks.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
Luvocom 3F PAHT KK 50056 BK FR filament is a PA6 Nylon filament filled with ceramic microspheres. It has the highest flame retardant rating and produces low smoke. By that, this filament complies with the fire behavior norms for the railway industry.
- UL-94 V-0 flame retardant rating
-
EN 45545 (fire behavior of materials in trains)
- ISO 4589-2 OI (oxygen Index) R22 + R23 – HL1, HL2, HL3
- ISO 5659-2 Ds (smoke density) R22 + R23 – HL3
Printed parts are stiff, strong, and temperature resistant up to 160C. Your parts can operate in high temperature conditions and resist high temperature fluctuations. Luvocom 3F PAHT KK 50056 BK FR is an excellent material for electrical insulation.
Key features
- UL-94 V-0 flame retardant rating
- Complies with EN 45545 fire behavior norms for trains
- Heat resistant up to 160 °C
- Electrical insulator.
- Halogen free
Suitable Applications
- High performance end-use parts
- Replacement parts in vehicles
- Applications that require fire resistance
- Printing electrical insulating parts
- Small scale productions
General printing guidelines *
| Nozzle size: ≥ 0.5mm | Layer height: ≥ 0.20mm | Experience level: Expert |
| Print temp: ± 270 – 300°C | Fan speed: 0 – 25% | Drying: 12h @80°C (max) |
| Heat bed: ± 90 – 110° C | Enclosure needed: Required | Adhesion: EasyFix Nr. VI |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
| Material Properties | Typical Value | Test Method |
|---|---|---|
| Specific gravity | 1.49 g/cm³ | ISO 1183-3 |
| Water absorption (23°C / 24h) | <0.3% | ISO 62 |
| Linear mould shrinkage | 0.0-0.1% | DIN 16742 |
| Mechanical Properties (23°C / 50% RH) | Typical Value | Test Method |
|---|---|---|
| Tensile strength (dry, @50 mm/min) | 55 MPa | ISO 527 |
| Elongation at maximum force (dry, @50 mm/min) | 1.2% | ISO 527 |
| Modulus of elasticity (dry, @1 mm/min) | 6 GPa | ISO 527 |
| Thermal Properties (23°C / 50% RH) | Typical Value | Test Method |
|---|---|---|
| HDT A 90°C | 90°C | ISO 75 |
| Continuous service temperature (20,000 h) | 120°C | IEC 60216 |
| Service temperature (during lifetime max. 200h) | 160°C | — |
| Electrical Properties (23°C / 50% RH) | Typical Value | Test Method |
|---|---|---|
| Insulation resistance strip electrode (R25) | >109 Ω | DIN IEC 60167 |
| Surface resistance (ROB) | >109 Ω | DIN IEC 60093 |
Drying recommendations
Luvocom 3F PAHT KK 50056 BK FR is a hygroscopic filament and therefore it is necessary to pre-dry the
filament in a blast drying oven at below settings:
- Temperature: 80°C
- Duration: 12hours
For optimal print results we recommend to print the pre-dried Luvocom 3F PAHT KK 50056 BK FR filament from a drying box to avoid that the material can accumulate humidity from the environment.
Abrasiveness
Please be aware that this 3D printing filament contains a relatively high concentration of extremely hard carbon fibers, which have an abrasive nature. In general these carbon fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.
Storage and handling
Filament should be stored at room temperature in a dry and dark place with humidity below 15%. Recommended storage temperature is ca. 18-25°C (64.4 -77.0°F). Keep out of moisture, sunlight and direct heat. When stored properly, product has a shelf life of 24 months. To obtain the best parameters of the printed object, it is recommended to dry the material prior to usage and to 3D print it directly from a dry box.
Compliance *
This filament is compliant to below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
Product export information
| HS Code: 39169090 | Description: Monofilament for 3D printing | Country of origin: European Union |
Safety Datasheet:
