CleasScent ABS (methylmethacrylate acrylonitrile butadiene styrene) combines good mechanical properties and translucency into a 3D printer filament that is easy to process
with limited warping and limited styrene smell. ClearScent ABS exhibits resistance to various chemicals and complies with UL 94 HB flammability standards.
Key features
- Translucent ABS filament
- 90% light transmittance with 2.2% haze
- UL 94 HB flammability rating
- Good chemical resistance
- Limited warping and styrene smell when being 3D printed
- Compatible with Helios Support for complex multi-extrusion 3D printing
- Post-processing with acetone, tetrahydrofuran (THF) and other analogous solvents
Applications
- Household tools
- Electronic goods
- Frames and panels
- Custom components
- Short-run manufacturing
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Experience level: Beginner |
| Print temp: ± 245 – 265° C | Fan speed: 0-30% | |
| Heat bed: ± 90 – 100° C | Enclosure needed: Recommended |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 106 g/cc | 50 gr coil | 0.75 Kg spool | 2.3 Kg spool | 4.5 Kg spool | 8 Kg spool |
| Ø 1.75mm | ± 19.6m | ± 294m | ± 902m | ± 1765m | ± 3138m |
| Ø 2.85mm | ± 7.4m | ± 111m | ± 340m | ± 665m | ± 1183m |
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
Safety Datasheet:
ClearScent ABS
ClearScent ABS is a translucent MABS type of 3D printer filament that is easy to 3D print with limited warping and styrene smell. This filament features translucency with good mechanical properties.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
ClearScent ABS
ClearScent ABS is a translucent MABS type of 3D printer filament that is easy to 3D print with limited warping and styrene smell. This filament features translucency with good mechanical properties.
If a product is out of stock, it is usually replenished within two weeks.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
CleasScent ABS (methylmethacrylate acrylonitrile butadiene styrene) combines good mechanical properties and translucency into a 3D printer filament that is easy to process
with limited warping and limited styrene smell. ClearScent ABS exhibits resistance to various chemicals and complies with UL 94 HB flammability standards.
Key features
- Translucent ABS filament
- 90% light transmittance with 2.2% haze
- UL 94 HB flammability rating
- Good chemical resistance
- Limited warping and styrene smell when being 3D printed
- Compatible with Helios Support for complex multi-extrusion 3D printing
- Post-processing with acetone, tetrahydrofuran (THF) and other analogous solvents
Applications
- Household tools
- Electronic goods
- Frames and panels
- Custom components
- Short-run manufacturing
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Experience level: Beginner |
| Print temp: ± 245 – 265° C | Fan speed: 0-30% | |
| Heat bed: ± 90 – 100° C | Enclosure needed: Recommended |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 106 g/cc | 50 gr coil | 0.75 Kg spool | 2.3 Kg spool | 4.5 Kg spool | 8 Kg spool |
| Ø 1.75mm | ± 19.6m | ± 294m | ± 902m | ± 1765m | ± 3138m |
| Ø 2.85mm | ± 7.4m | ± 111m | ± 340m | ± 665m | ± 1183m |
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
Safety Datasheet:
Customer Service
My account
Services
Company
Legal
Main categories
Contact us
Tarweweg 3
6534 AM Nijmegen
The Netherlands
Phone:
Info: +31 (0)88 743 4000
Sales: +31 (0)88 743 4001
Email:
info@formfutura.com
sales@formfutura.com
support@formfutura.com
marketing@formfutura.com
press@formfutura.com