STYX-12 is an industrial PA12 grade nylon filament which combines excellent mechanical, chemical and hygroscopic properties with printability.
STYX-12 has a very low water absorption compared to other nylons and can be printed at relatively low temperatures. This combination of properties has resulted in high-performance and industrial-grade nylon which can be printed on a wide-range of FFF/FDM 3D printers.
Unique features
- Superb mechanical properties
- Strong, flexible, high impact resistance, high crack resistance, high scratch resistance
- Excellent chemical resistance
- Excellent weather and UV resistance
- Outstanding dimensional stability
- Good first layer adhesion to EasyPad + DimaFix prepared print bed
- Very clear in its natural form (without added colorants)
General printing guidelines *
Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 100 – 110% |
Print temp: ± 240 – 270° C | Print speed: Medium / High | Retraction: Yes ± 5mm |
Heat bed: ± 80 – 120° C | Fan speed: 0-30% | Experience level: Intermediate / Expert |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
ρ: 1.02 g/cc | 50 gr coil | 0.5 Kg spool | |||
Ø 1.75mm | ± 20.4m | ± 204m | |||
Ø 2.85mm | ± 7.7m | ± 77m |
Product export information
HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Safety Datasheet:
STYX-12
STYX-12 is an industrial PA12 grade nylon 3D printer filament that 3D prints on relatively low temperatures and combines excellent mechanical, chemical and hygroscopic properties with printability.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
Featured Products
EasyWood (SALE)
ApolloX (SALE)
ReForm – rPET (SALE)
Durabio
Addigy F3040
Addigy F1030 FR
3Diakon
FlexiFil
EasyFil PET
ClearScent ABS
STYX-12
STYX-12 is an industrial PA12 grade nylon 3D printer filament that 3D prints on relatively low temperatures and combines excellent mechanical, chemical and hygroscopic properties with printability.
If a product is out of stock, it is usually replenished within two weeks.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
STYX-12 is an industrial PA12 grade nylon filament which combines excellent mechanical, chemical and hygroscopic properties with printability.
STYX-12 has a very low water absorption compared to other nylons and can be printed at relatively low temperatures. This combination of properties has resulted in high-performance and industrial-grade nylon which can be printed on a wide-range of FFF/FDM 3D printers.
Unique features
- Superb mechanical properties
- Strong, flexible, high impact resistance, high crack resistance, high scratch resistance
- Excellent chemical resistance
- Excellent weather and UV resistance
- Outstanding dimensional stability
- Good first layer adhesion to EasyPad + DimaFix prepared print bed
- Very clear in its natural form (without added colorants)
General printing guidelines *
Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 100 – 110% |
Print temp: ± 240 – 270° C | Print speed: Medium / High | Retraction: Yes ± 5mm |
Heat bed: ± 80 – 120° C | Fan speed: 0-30% | Experience level: Intermediate / Expert |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
ρ: 1.02 g/cc | 50 gr coil | 0.5 Kg spool | |||
Ø 1.75mm | ± 20.4m | ± 204m | |||
Ø 2.85mm | ± 7.7m | ± 77m |
Product export information
HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Safety Datasheet:
Related Products
ReForm – Organic rPLA
LUVOCOM 3F PPS CF 9938
BioFil – PCL
Athena GF10
AthenaX CF10
AthenaX
MetalFil – Brass
Kratos PC
Matt PLA (SALE)
EasyWood (SALE)
Customer Service
My account
Services
Company
Legal
Main categories
Contact us
Tarweweg 3
6534 AM Nijmegen
The Netherlands
Phone:
Info: +31 (0)88 743 4000
Sales: +31 (0)88 743 4001
Email:
info@formfutura.com
sales@formfutura.com
support@formfutura.com
marketing@formfutura.com
press@formfutura.com