Galaxy PLA is a deep metallic coloured PLA range – based on our EasyFil PLA compound – with an incredibly high amount of silver aluminium-flakes added. The high added aluminium-flake content gives a beautiful sparkling, reflecting and glittering finish to Galaxy PLA printed objects.
Due to the high amount of silver aluminium-flakes added to the Galaxy PLA compound you can 3D print beautiful shimmering objects without visible layers and subtle colour shadings and radiance. Even though its high silver-aluminium-flaked content Galaxy PLA is not abrasive to the nozzle of your 3D printer.

 

Unique features

  • Extremely glittering & shimmering surface finish
  • 3D print objects without visible layers
  • Not abrasive to the nozzle of 3D printers
  • Incredibly deep coloured 3D printer filament
  • Very easy to print
  • Warp-free printing and no deformation after cooling
  • Improved flowing behaviour and inter-layer adhesion
  • Good first layer adhesion to several (un)heated print surfaces

 

General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: > 0.1mm Flow rate: ± 100%
Print temp: ± 210 – 235° C Print speed: Medium Retraction: Yes ± 5mm
Heat bed: ± 0 – 60° C Fan speed: 50-100% Printing surface: Blue Tape / Glass
Enclosed printer needed: No Heated Build Chamber: No Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
 

Filament length

ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool
Ø 1.75mm ± 16.8m ± 251m
Ø 2.85mm ± 6.3m ± 95m

 

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

 

Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Technical Datasheet:

Safety Datasheet:

Galaxy PLA

Galaxy PLA is a deep metallic colored PLA type of 3D printer filament with a high contend of silver aluminum particles inside, which gives 3D printed parts a sparkling galaxy-like effect.

1.75
2.85
Andromeda Purple
Callisto Yellow
Champagne Gold
Emerald Green
Gemini Blue
Jupiter Brown
Mercury Brown
Opal Green
Orion Blue
Ruby Red
Space Grey
Titanium Silver
250
750

If a product is out of stock, it is usually replenished within two weeks.

SKU: Galaxy PLA Tags: , ,

Galaxy PLA

Galaxy PLA is a deep metallic colored PLA type of 3D printer filament with a high contend of silver aluminum particles inside, which gives 3D printed parts a sparkling galaxy-like effect.

1.75
2.85
Andromeda Purple
Callisto Yellow
Champagne Gold
Emerald Green
Gemini Blue
Jupiter Brown
Mercury Brown
Opal Green
Orion Blue
Ruby Red
Space Grey
Titanium Silver
250
750

If a product is out of stock, it is usually replenished within two weeks.

SKU: Galaxy PLA Tags: , ,
Galaxy PLA is a deep metallic coloured PLA range – based on our EasyFil PLA compound – with an incredibly high amount of silver aluminium-flakes added. The high added aluminium-flake content gives a beautiful sparkling, reflecting and glittering finish to Galaxy PLA printed objects.
Due to the high amount of silver aluminium-flakes added to the Galaxy PLA compound you can 3D print beautiful shimmering objects without visible layers and subtle colour shadings and radiance. Even though its high silver-aluminium-flaked content Galaxy PLA is not abrasive to the nozzle of your 3D printer.

 

Unique features

  • Extremely glittering & shimmering surface finish
  • 3D print objects without visible layers
  • Not abrasive to the nozzle of 3D printers
  • Incredibly deep coloured 3D printer filament
  • Very easy to print
  • Warp-free printing and no deformation after cooling
  • Improved flowing behaviour and inter-layer adhesion
  • Good first layer adhesion to several (un)heated print surfaces

 

General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: > 0.1mm Flow rate: ± 100%
Print temp: ± 210 – 235° C Print speed: Medium Retraction: Yes ± 5mm
Heat bed: ± 0 – 60° C Fan speed: 50-100% Printing surface: Blue Tape / Glass
Enclosed printer needed: No Heated Build Chamber: No Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
 

Filament length

ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool
Ø 1.75mm ± 16.8m ± 251m
Ø 2.85mm ± 6.3m ± 95m

 

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

 

Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Technical Datasheet:

Safety Datasheet: