Recommended product: FormFutura ReFill System
Premium PLA CF03 is our Premium PLA with circa 3% added carbon fibers. This delegate filling with carbon fibers results in superb aesthetics. Easy printing. No visible layers. Amazing carbon surface finish.
Premium PLA CF03 is the filament of choice for prints that need a carbon look and feel. It focuses on the aesthetics of carbon. Not on the mechanical properties of carbon. You can even print Premium PLA CF03 with brass nozzles.
Important key features
- PLA with amazing carbon look and aesthetics
- 3D prints without visible layers
- Compatible with brass nozzles
- High speed printing compatible
- Biodegradability under composting conditions
Suitable applications
- Home decor
- Functional prototyping
- Visualization aids
- End use parts that do not require the full strength of carbon
General printing guidelines *
Nozzle size: ≥ 0.4mm | Layer height: ≥ 0.2mm | Flow rate: ± 100% |
Print temp: ± 230 – 280°C | Heat bed: ± 50 – 60° C | Fan speed: 5-100% |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of
different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Storage and handling
Filament should be stored at room temperature in a dry and dark place with humidity below 15%. Recommended storage temperature is ca. 18-25°C (64.4 -77.0°F). Keep out of moisture, sunlight and direct heat. When stored properly, product has a shelf life of 24 months. To obtain the best parameters of the printed object, it is recommended to dry the material prior to usage and to 3D print it directly from a dry box.
Product export information
HS Code: 39169090 | Description: Monofilament for 3D printing | Origin: European Union |
Safety Datasheet: