STYX PA6 is an easier to 3D print nylon filament compared to other PA6 filaments. It has much lower warping and improved layer adhesion. This makes STYX PA6 a versatile nylon filament for 3D printing end-use parts. FormFutura’s STYX PA6 exhibits good resistance to oils, fuels, and lubricants. It has a high impact strength and good mechanical properties. 3D printed parts are strong, durable, and shows good resistance to wear and abrasion. This makes STYX PA6 a great filament for 3D printing functional engineering parts.
STYX PA6 also comes with a statement for food compliance which can be viewed by visiting this link
Important key features
- Low warping PA6 filament
- Easy to print with a very good layer adhesion
- High strength and resistance to abrasion
- High chemical resistance
- Good electrical insulating properties
Suitable applications
- Making electrical insulating parts
- End-use parts that require a high wear resistance
- Parts that are resistant to oils, lubricants, and fuels
- Making jigs and fixtures
General printing guidelines *
| Nozzle size: ≥ 0.25mm | Layer height: ≥ 0.1mm | Print temp: ± 255 – 285° C * |
| Heat bed: ± 90 – 110° C | Fan speed: 0-30% | Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: European Union |
Compliance *
This filament is compliant to below listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Safety Datasheet:
STYX PA6
STYX PA6 is an industrial grade nylon 3D printer filament that 3D prints on relatively low temperatures and combines excellent mechanical, chemical and hygroscopic properties with printability.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
STYX PA6
STYX PA6 is an industrial grade nylon 3D printer filament that 3D prints on relatively low temperatures and combines excellent mechanical, chemical and hygroscopic properties with printability.
If a product is out of stock, it is usually replenished within two weeks.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
STYX PA6 is an easier to 3D print nylon filament compared to other PA6 filaments. It has much lower warping and improved layer adhesion. This makes STYX PA6 a versatile nylon filament for 3D printing end-use parts. FormFutura’s STYX PA6 exhibits good resistance to oils, fuels, and lubricants. It has a high impact strength and good mechanical properties. 3D printed parts are strong, durable, and shows good resistance to wear and abrasion. This makes STYX PA6 a great filament for 3D printing functional engineering parts.
STYX PA6 also comes with a statement for food compliance which can be viewed by visiting this link
Important key features
- Low warping PA6 filament
- Easy to print with a very good layer adhesion
- High strength and resistance to abrasion
- High chemical resistance
- Good electrical insulating properties
Suitable applications
- Making electrical insulating parts
- End-use parts that require a high wear resistance
- Parts that are resistant to oils, lubricants, and fuels
- Making jigs and fixtures
General printing guidelines *
| Nozzle size: ≥ 0.25mm | Layer height: ≥ 0.1mm | Print temp: ± 255 – 285° C * |
| Heat bed: ± 90 – 110° C | Fan speed: 0-30% | Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: European Union |
Compliance *
This filament is compliant to below listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Safety Datasheet:
