High Speed Compatible 300mm/s

With high speed 3D printing becoming more prominent due to the introduction of high speed 3D printers, FormFutura is excited to introduce a range of new and existing upgraded materials to our assortment. These materials, while still suitable for traditional printers, have also been fully optimized for the new high speed 3D printing technology.

 

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament. Premium PLA is less modified than other PLA’s, resulting in an extremely pure filament.
Premium PLA is a slightly harder PLA with an excellent thermal stability. I has a slightly faster crystallization process than other PLA’s. Therefore it is often used for fast printing and large(r) scale prototyping on industrial-sized 3D printers.

 

Unique features

  • Very easy to print
  • Warp-free printing and no deformation after cooling
  • Improved flowing behaviour and inter-layer adhesion
  • Good first layer adhesion to several (un)heated print surfaces
  • Almost odourless processing/printing
  • Biodegradable
  • Available in a variety of semi-translucent colors and opaque black/white

 

General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100%
Print temp: ± 200 – 230° C Print speed: Medium Retraction: Yes ± 5mm
Heat bed: ± 0 – 60° C Fan speed: 50-100% Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

*)When using high speed printing, the above displayed settings will likely need to be adjusted accordingly.

 

Filament length

ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool
Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m
Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m

 

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

 

Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Technical Datasheet:

Safety Datasheet:

Premium PLA

Premium PLA is a more pure PLA type of 3D printer filament with higher crystallinity, which makes it the PLA of choice for 3D printing parts with overhangs and for objects where bridging is required.

1.75
2.85
Strong Black
Frosty White
Robotic Grey
Atomic Green
C.C.Transparent
Dutch Orange
Flaming Red
Ocean Blue
Solar Yellow
Sweet Purple
250
1000
2300
4500
8000

Premium PLA

Premium PLA is a more pure PLA type of 3D printer filament with higher crystallinity, which makes it the PLA of choice for 3D printing parts with overhangs and for objects where bridging is required.

1.75
2.85
Strong Black
Frosty White
Robotic Grey
Atomic Green
C.C.Transparent
Dutch Orange
Flaming Red
Ocean Blue
Solar Yellow
Sweet Purple
250
1000
2300
4500
8000

If a product is out of stock, it is usually replenished within two weeks.

High Speed Compatible 300mm/s

With high speed 3D printing becoming more prominent due to the introduction of high speed 3D printers, FormFutura is excited to introduce a range of new and existing upgraded materials to our assortment. These materials, while still suitable for traditional printers, have also been fully optimized for the new high speed 3D printing technology.

 

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament. Premium PLA is less modified than other PLA’s, resulting in an extremely pure filament.
Premium PLA is a slightly harder PLA with an excellent thermal stability. I has a slightly faster crystallization process than other PLA’s. Therefore it is often used for fast printing and large(r) scale prototyping on industrial-sized 3D printers.

 

Unique features

  • Very easy to print
  • Warp-free printing and no deformation after cooling
  • Improved flowing behaviour and inter-layer adhesion
  • Good first layer adhesion to several (un)heated print surfaces
  • Almost odourless processing/printing
  • Biodegradable
  • Available in a variety of semi-translucent colors and opaque black/white

 

General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100%
Print temp: ± 200 – 230° C Print speed: Medium Retraction: Yes ± 5mm
Heat bed: ± 0 – 60° C Fan speed: 50-100% Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

*)When using high speed printing, the above displayed settings will likely need to be adjusted accordingly.

 

Filament length

ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool
Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m
Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m

 

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

 

Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Technical Datasheet:

Safety Datasheet: