Luvocom 3F PEKK 50082  (PolyEtherKetoneKetone) is a high-performance polymer from the PAEK (PolyArylEtherKetone) family. The filament can be processed at lower 3D printing temperatures than PEEK-based 3D printer filaments. Yet it provides approximately a 15°C higher glass transition temperature (Tg). The material is suitable for use in applications that will be exposed to short term service temperatures of up to 300°C and continuous service temperatures up to 255°C.

Luvocom 3F PEKK 50082 is engineered to replace metal and composite parts used in various industries. The filament is suitable to be used in industries ranging from aerospace, marine and automotive to medical, oil & gas and energy. The filament exhibits excellent layer bonding, resulting in an unsurpassed dimensional accuracy and z-strength of the parts.

Key features

• Lehvoss Luvocom 3F PEKK 50082 NT inside
• Suitable for applications with a continuous service temperature of 255°C
• Short term service temperature of 300°C (during lifetime max. 200h)
• Very limited to no warping
• Unique tribological properties
• Excellent mechanical properties
• Flame resistance properties according to UL 94 V-0
• Exceptional chemical resistance properties

Applications

• Dynamically-stressed parts
• Highly chemically-resistant parts
• Wear resistant parts
• Aerospace applications
• Automotive

The PAEK family

PolyArylEtherKetone (PEAK) is a family of semi-crystalline high performance thermoplastics that are characterized by high mechanical strength and excellent resistance to temperature, chemicals and wear.
The most widely used members of the PAEK thermoplastic family are:

• PolyEtherEtherKetone (PEEK)
• PolyEtherKetoneKetone (PEKK)
• PolyEtherKetone (PEK)
• PolyEtherKetoneEtherKetoneKetone (PEKEKK)
• PolyEtherEtherKetoneKetone (PEEKK)

General printing guidelines *

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

Product export information

Compliance *

This filament is compliant to below-listed directives and regulations.

• RoHS directive 2011/65/EC
• REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.