PEI ULTEM 9085 is an amorphous ultra-performance PEI (Polyether Imide) 3D printer filament. It combines exceptional dimensional stability with good chemical resistance. The material has a glass transition temperature of 186ยฐC.
PEI ULTEM 9085 is a flame retardant 3D printing filament with low smoke evolution. It meets the UL 94 V-0 and 5VA ratings. The material combine excellent layer bonding, dimensional accuracy, a high impact resistance, durablitity and a high tensile strength into one filament.
Key features
- Glass transition temperature ofย 186ยฐC
- Excellent dimensional stability
- Long-term hydrolytic stability
- Excellent mechanical properties
- Flame retardant with UL 94 V-0ย and 5VA ratings
- Low smoke evolution and low smoke toxicity
- Good chemical resistance properties
Applications
- Electrical applications
- Chemically-resistant parts
- Durable parts
- Aerospace applications
- Automotive
General printing guidelinesย *
| Nozzle size:ย โฅ 0.4mm | Layer height:ย โฅ 0.10mm | Experience level:ย Expert |
| Print temp:ย ยฑ 350 – 390ยฐ C | Fan speed:ย 0 – 25% | Drying:ย +4 hours at max.110ยฐC |
| Heat bed:ย โฅย 120ยฐ C | Enclosure needed:ย 90ยฐC heated chamber |
Adhesion:ย EasyFix Nr. VII |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ฯ: 1.34 g/cc | 0.2 Kg spool | 0.5 Kg spool | |||
| ร 1.75mm | ยฑ 62m | ยฑ 155m | |||
| ร 2.85mm | ยฑ 23m | ยฑ 58m |
Product export information
| HS Code:ย 39169090 | Description:ย Monofilament | Country of origin:ย the Netherlands |
Complianceย *
This filament is compliant to below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
Safety Datasheet:
PEI ULTEM 9085
PEI ULTEM 9085 combines excellent thermal properties, exceptional dimensional stability, inherent flame retardancy and good chemical resistance into a high performance 3D printing filament.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
PEI ULTEM 9085
PEI ULTEM 9085 combines excellent thermal properties, exceptional dimensional stability, inherent flame retardancy and good chemical resistance into a high performance 3D printing filament.
If a product is out of stock, it is usually replenished within two weeks.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
PEI ULTEM 9085 is an amorphous ultra-performance PEI (Polyether Imide) 3D printer filament. It combines exceptional dimensional stability with good chemical resistance. The material has a glass transition temperature of 186ยฐC.
PEI ULTEM 9085 is a flame retardant 3D printing filament with low smoke evolution. It meets the UL 94 V-0 and 5VA ratings. The material combine excellent layer bonding, dimensional accuracy, a high impact resistance, durablitity and a high tensile strength into one filament.
Key features
- Glass transition temperature ofย 186ยฐC
- Excellent dimensional stability
- Long-term hydrolytic stability
- Excellent mechanical properties
- Flame retardant with UL 94 V-0ย and 5VA ratings
- Low smoke evolution and low smoke toxicity
- Good chemical resistance properties
Applications
- Electrical applications
- Chemically-resistant parts
- Durable parts
- Aerospace applications
- Automotive
General printing guidelinesย *
| Nozzle size:ย โฅ 0.4mm | Layer height:ย โฅ 0.10mm | Experience level:ย Expert |
| Print temp:ย ยฑ 350 – 390ยฐ C | Fan speed:ย 0 – 25% | Drying:ย +4 hours at max.110ยฐC |
| Heat bed:ย โฅย 120ยฐ C | Enclosure needed:ย 90ยฐC heated chamber |
Adhesion:ย EasyFix Nr. VII |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ฯ: 1.34 g/cc | 0.2 Kg spool | 0.5 Kg spool | |||
| ร 1.75mm | ยฑ 62m | ยฑ 155m | |||
| ร 2.85mm | ยฑ 23m | ยฑ 58m |
Product export information
| HS Code:ย 39169090 | Description:ย Monofilament | Country of origin:ย the Netherlands |
Complianceย *
This filament is compliant to below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
Safety Datasheet:
Customer Service
My account
Services
Company
Legal
Main categories
Contact us
Tarweweg 3
6534 AM Nijmegen
The Netherlands
Phone:
Info: +31 (0)88 743 4000
Sales: +31 (0)88 743 4001
Email:
info@formfutura.com
sales@formfutura.com
support@formfutura.com
marketing@formfutura.com
press@formfutura.com