High Speed Compatible 350mm/s

With high speed 3D printing becoming more prominent due to the introduction of high speed 3D printers, FormFutura is excited to introduce a range of new and existing upgraded materials to our assortment. These materials, while still suitable for traditional printers, have also been fully optimized for the new high speed 3D printing technology.

ApolloX is UV- and weather resistant and thus great for outdoor and automotive applications. It combines a high heat resistance with a superb impact strength.

ApolloX is an industrial-grade ASA filament enhanced with five other polymers and modifiers. The material prints with a precision comparable with injection molding. It exhibits a perfect first- and interlayer adhesion and 3D prints without warping. For larger objects, we recommend printing in a heated chamber.

ApolloX profiles are available on the Ultimaker Marketplace. ApolloX is an approved and validated partner material.

Unique features

• • UV & weather resistant
  • FDM/FFF-optimized
  • Warp-free printing
  • Optimized filament flowing behaviour, thermal stability, and inter-layer adhesion
  • Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad
  • Greatly improved mechanical properties and strength
  • Extremely high printing precision
  • Printing with remarkable fine detail

   

  General printing guidelines *

  Nozzle size: ≥ 0.15mm	Layer height: ≥ 0.1mm	Adhesive: EasyFix Nr. I
  Print temp: ± 235 – 255° C *	Fan speed: 0 – 30%	Experience level: Intermediate
  Heat bed: ± 80 – 100° C *	Enclosure: Yes, 40° C

  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

  *)When using high speed printing, the above displayed settings will likely need to be adjusted accordingly.

  Strong adhesion
  ApolloX is an engineering-grade material. It is recommended to use an adhesive on your build plate as a protective layer. We recommend to use EasyFix Nr. I as buildplate adhesive. For large(r) prints we recommend to 3D print in a heated chamber. 

   

  Filament length

  ρ: 1.11 g/cc	50 gr coil	0.75 Kg spool	2.3 Kg spool	4.5 Kg spool	8 Kg spool
  Ø 1.75mm	± 18.7m	± 281m	± 861m	± 1685m	± 2996m
  Ø 2.85mm	± 7.1m	± 106m	± 325m	± 635m	± 1130m

   

  Product export information

  HS Code: 39169090

  Description: Monofilament

  Country of origin: the Netherlands

   

  Compliance

  This filament is compliant to below listed directives and regulations.

  • • • RoHS directive 2011/65/EC
      • REACH directive 1907/2006/EC

      *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available, and applies only for the above described products.