LUVOCOM 3F PEI 50236 is a high-performance thermoplastic engineered for demanding industrial applications. Known for its exceptional mechanical strength, thermal stability, and chemical resistance, PEI is a trusted material in sectors like aerospace, automotive, medical, and electronics.
Unlike standard 3D printing filaments, PEI excels in environments where heat, stress, or corrosive substances would compromise lesser materials. It comes with UL94 V0 classification and we achieved the maximum level of FST requirement for the railway industry standards (EN45545-2 R1 HL3).
Key features
- Dimensional stability
- Mechanical strength
- Heat resistant up to 200°C
- Electrical insulator
- Chemical resistant
- Outstanding fire resistance (UL V0 and EN 45545 -2 R1 HL3)
Suitable Applications
- Automotive
- Medical
- Electronics
- Custom tooling
- Small scale productions
General printing guidelines *
| Nozzle size: ≥ 0.4mm | Layer height: ≥ 0.20mm | Experience level: Expert |
| Print temp: ± 350 – 400°C | Fan speed: 0 – 25% | Drying: 12h @100°C (max) |
| Heat bed: ± 100 – 140° C | Enclosure needed: Required |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Compliance *
This filament is compliant to below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
Product export information
| HS Code: 39169090 | Description: Monofilament for 3D printing | Country of origin: European Union |
Safety Datasheet:
LUVOCOM 3F PEI 50236 GY
PEI filament that offers exceptionally high dimensional stability and precision for printed parts.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
Featured Products
LUVOCOM 3F PEI 50236 GY
PEI filament that offers exceptionally high dimensional stability and precision for printed parts.
If a product is out of stock, it is usually replenished within two weeks.
- Ordered before 15h CET? Ships same business day
- Worldwide shipping with UPS & FedEx
- One-stop shop for 3D printing materials
LUVOCOM 3F PEI 50236 is a high-performance thermoplastic engineered for demanding industrial applications. Known for its exceptional mechanical strength, thermal stability, and chemical resistance, PEI is a trusted material in sectors like aerospace, automotive, medical, and electronics.
Unlike standard 3D printing filaments, PEI excels in environments where heat, stress, or corrosive substances would compromise lesser materials. It comes with UL94 V0 classification and we achieved the maximum level of FST requirement for the railway industry standards (EN45545-2 R1 HL3).
Key features
- Dimensional stability
- Mechanical strength
- Heat resistant up to 200°C
- Electrical insulator
- Chemical resistant
- Outstanding fire resistance (UL V0 and EN 45545 -2 R1 HL3)
Suitable Applications
- Automotive
- Medical
- Electronics
- Custom tooling
- Small scale productions
General printing guidelines *
| Nozzle size: ≥ 0.4mm | Layer height: ≥ 0.20mm | Experience level: Expert |
| Print temp: ± 350 – 400°C | Fan speed: 0 – 25% | Drying: 12h @100°C (max) |
| Heat bed: ± 100 – 140° C | Enclosure needed: Required |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Compliance *
This filament is compliant to below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
Product export information
| HS Code: 39169090 | Description: Monofilament for 3D printing | Country of origin: European Union |
Safety Datasheet:
Related Products
