Shop / Filaments / PETG / All round PETG / ReFill PETG
EasyFil ePLA From   8,26 Excl. VAT
Back to products
ReFill PLA From   12,40 Excl. VAT


ReFill PETG is manufactured for usage with re-usable master spools. Print your own spool.This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum.

Traffic Black
Signal White
Light Grey
Iron Grey
Light Blue
Signal Blue
Traffic Green
Traffic Red
Yellow Green
Zinc Yellow

When a product is out of stock, it is usually restocked within two weeks.


FormFutura ReFill PETG is a PETG filament without a spool. Refill PETG comes on a coil and fits on reusable master spools.
You can download the files to print your very own spool on our downloads page.

This solution is the most sustainable option and reduces packaging waste.
Sustainability doesn’t have to be expensive.
ReFill PETG comes at a retail price of €16,99 per 750gram coil and is available in 175mm diameter.

Important key features

  • Minimal packaging waste (no spool / box).
  • Retail price of €16,99 for 0.75kg coils.
  • Food contact approved according to EU directives.
  • Available in 0.75kg coils.
  • Very easy to 3D print.


Suitable applications

  • Functional prototyping.
  • Waterproof applications.
  • Snap fit components.
  • Mounts, jigs, and fixtures.
  • Signage.


Reduce your carbon footprint with ReFill PETG

FormFutura ReFill PETG isn’t spooled on a disposable spool. It comes on a coil and fits on reusable master spools.
ReFill coils are only packaged in reusable vacuum-sealed zipper bags. These zipper bags can be (re)used for storing your various filaments!

General printing guidelines *

Nozzle size: ≥ 0.1mm Layer height: ≥ 0.05mm Enclosure needed: No
Print temp: ± 235 – 255° C Fan speed: 0-50% Experience level: Beginner
Heat bed: ± 80 – 90° C Adhesive: EasyFil Nr. I

*) Above displayed settings are meant as guidance to find your optimal print settings.
These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer.
There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 1.29 g/cc 0.75 Kg coil 2.3 Kg coil
Ø 1.75mm ± 242m ± 741m
Ø 2.85mm ± 91m ± 279m


Product export information

HS Code: 39169090 Description: Monofilament for 3D Printing Origin: European Union


Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Technical Datasheet:

Safety Datasheet: