ReForm rPLA is based on exactly the same unique formulation as our EasyFil PLA range, but is made out of residual extrusion waste streams which are re-compounded and homogenized into a high-end and easy to print upcycled PLA filament with significant less environmental impact.
100% upcycled/recycled filament with retaining the unique easy-to-print characteristics of EasyFil PLA
Less environmental impact by quality controlling and re-using extrusion waste streams
Only residual waste streams of EasyFil PLA is being re-used, thus pure quality!
ReForm filaments are spooled on easy to recycle and dispose recycled cardboard spools
ReForm filament is packaged in recycled carton boxes
Very easy to print
Warp-free printing and no deformation after cooling
Improved flowing behaviour and inter-layer adhesion
Good first layer adhesion to several (un)heated print surfaces
General printing guidelines *
|Nozzle size: ≥ 0.15mm||Layer height: ≥ 0.1mm||Flow rate: ± 100%|
|Print temp: ± 200 - 230° C||Print speed: Medium||Retraction: Yes ± 5mm|
|Heat bed: ± 0 - 60° C||Fan speed: 50-100%||Experience level: Beginner|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 1.24 g/cc||50 gr coil||1 Kg spool|
|Ø 1.75mm||± 16.8m||± 335m|
|Ø 2.85mm||± 6.3m||± 126m|
Product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant to below listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Specifications for ReForm - rPLA
|Color||Black or Caramel or Elephant Grey or Moss Grey or Sangria Red or Turkish Blue or Venom Green or White|
|Diameter||1.75mm or 2.85mm|
|Weight||2300 gram (plastic spool) or 4500 gram (plastic spool) or 750 gram or 1000 gram or 250 gram or 2300 gram or 3500 gram or 4500 gram or 8000 gram|